# data[].attributes.headline
MUSYRIF ZAMHARIR BIN MUSTAFA (01DTK19F1027)

# data[].attributes.subject
MUSYRIF ZAMHARIR BIN MUSTAFA (01DTK19F1027)

# data[].attributes.body
Task 1:
Firstly,we need to sterilize the glass jars in the stockpot with water.After that,pour the milk into the sterilized glass jars.Then,we need to cover the glass jars with enough of water in the stockpot.Gradually, heat the water in medium heat for 20 minutes untill it reaches a temperature of 80° Celcius. Carefully remove the jars from the hot stockpot and leave it with the cool water for 15 minutes.Finally,store the cooled jars in your refrigerator.

Task 2:
At first, tou need to select the the replacement tiles to replace the broken tiles.And then,choose  a matching grout with tiles colour.After that,remove the old broken tile carefully by using a flat bars.Use a notched trowel to spread the mortar before laying the replacement tiles.And then,clean the grout surface by using a damp sponge.Lastly,leave the replacement tiles to dry at least 24 hours.

# data[].attributes.body
Name : Muhammad Amirul Hakim bin Norhamidi (01DTK19F1014)
Name : Muhammad Amirul Hakim bin Norhamidi (01DTK19F1014)
Task 1:
Firstly, you must sterilized the glass jars in the stockpot with water. After that, pour the milk into previously sterilized glass jars. Next, you should covered the glass jars with enough water in the stockpot. Later, heat the water gradually in medium heat for 20 minutes until it reaches a temperature of 80° Celsius. Lastly, you must carefully remove the jars from the stockpot and leave jars with cool water for 15 minutes.

Task 2:

favorite
1

# data[].attributes.body
01DTK19F1013
TASK1
Firstly,we need to sterilizied the glass jars with a hot water in stockpot.Next, poured the milk into the glass jars that have been sterilized.Then, we need to covered the top of the glass jars with enough of water. Subsquently,heat the water until 80 celcius gradually with medium heat.Later removed the hot jar and leaved it outside to make sure the water is cool for about 15 minutes. Finally,take all the cooled jars and store it in the refrigerator.

TASK2
Firstly,the replacement tiles are selected to replace broken tiles.Next the grout is chosen to match the tiles colour.Then  broken tiles are removed carefully by using a flat bars. After that ,mortar are spread before laying the replacement tiles by using notched trowel.Later, the grout are cleaned  using damp sponge. Finally the replacement tile is leaved to dry for at least 24 hours.

# data[].attributes.headline
Muhammad Ashraaf bin Osman (01DTK19F1025)

# data[].attributes.subject
Muhammad Ashraaf bin Osman (01DTK19F1025)

# data[].attributes.headline
Muhamad Zahidi Ekram Bin Mohd Zainudin(01DTK19F1018)

# data[].attributes.subject
Muhamad Zahidi Ekram Bin Mohd Zainudin(01DTK19F1018)

# data[].attributes.body
Task 1
Firstly,glass jar is steriliezed with water in the stockpot.next milk is poured in the sterilized glass jar.Then enough water is poured until it covered the glass jar.Gradually heated the water in medium heat for 20 minutes until it reaches 80 celsius.Lastly jars in the stockpot is removed and leave in cool water for 15 minutes.
Task 2
Firstly,replacement tiles are selected to replace the broken tiles.Next,grout surface is use cleaned by using a damp sponge.then,broken tiles is removed carefully using a flat bar.Next,to match the tile’s colour the correct grout is choosed.Then,before laying the replacement tile notched trowel is use to spread the mortar.Finally,replacement tile is leaved to dry atleast 24 hours.

# data[].attributes.headline
NURUL A'THIROH BINTI JALIL (01DTK19F1003)

# data[].attributes.subject
NURUL A'THIROH BINTI JALIL (01DTK19F1003)

# data[].attributes.body
Task 1
Firstly, glass jars are sterilized  with put into the stockpot with water. Then, sterilized glass jars are pouring the milk. After that, glass jars are covered and put enough water into stockpot. Next, the water is heated gradually over medium heat for 20 minutes with reaces 80° Celsius. Furthemore, glass jars are removed from stockpot and leaved into cool water for 15 minutes. Finally, the cooled jars are stored in refrigerator.

Task 2

Firstly, tile is selected replacement tiles with replace the broken tiles. Next, grout are chosen to match the tile’s colour. Then, the broken tile are removed carefully with using flat bar. Furthemore, mortar are spreaded before laying the replament tile using notched towel. After that, grout surface are cleaned with damp sponge. Lastly, the replacement tile are leaving to dry at least 24 hours.

# data[].attributes.headline
Name : Nur Afiqah Binti Taufik ( 01DTK19F1007)

# data[].attributes.subject
Name : Nur Afiqah Binti Taufik ( 01DTK19F1007)

# data[].attributes.body
task 1
Firstly sterilized the glass jars on stockpot with filled water. Then poured the milk into strerilized glass jars. Next covered the glass jars and poured enough water into stockpot. Then heated the water with raised the fire gradually until medium with 20 minutes and reaches 80 celcius.
Then removed the jars from stockpot and put the jars into a bowl and leave the jars cool with water inside. Leave the jars around 15 minutes. Finally store the cooled jars into refrigerator.

task 2
Firstly, tiles is selected for the  replacement tiles for replace the broken tiles. Then grout are choosen to match the tile’s colour. After that the broken tile are remove carefully using flat bar. Next mortar are spreaded before laying the replacement tile using notched tower. Furthermore grout surface are cleaned by using damp sponge. Lastly, the replacement tile is leaved to dry around 24 hours.

# data[].attributes.headline
NAME : IKMAL HAKIM BIN JALIM (01dtk19f1030)

# data[].attributes.subject
NAME : IKMAL HAKIM BIN JALIM (01dtk19f1030)

# data[].attributes.body
Task 1 :
First, the glass jars are sterilized with a stockpot of water. Then, milk is poured into the sterilized glass jars. Next, the glass jars are covered with enough water in the stockpot. Thus, water is heated gradually in medium heat for 20 minutes until reaches 80 Celcius. After that, jars are removed from the stockpot and left in cool water for 15 minutes. Lastly, cooled jars are stored in refrigerator

TASK 2 :
First, the broken tiles are replaced with the replacement tiles. Then, grout is chosen to match the tile's colour. After that, broken tiles are removed carefully using a flat bar. Next, before laying the replacement tile, mortar is spread with a notched towel. Thus, grout surface is cleaned using a damp sponge. Lastly, replacement tile is leaved to dry for at least 24 hours.

# data[].attributes.headline
NAME : WAN MUHAMAD AIDIL BIN WAN ROHIMI(01DTK19F1029)

# data[].attributes.subject
NAME : WAN MUHAMAD AIDIL BIN WAN ROHIMI(01DTK19F1029)

# data[].attributes.body
Task 1:
Firstly, the glass jars are sterilized in stockpot with full of hot water. Secondly, the milk is poured in the sterilized glass jars. Thirdly, the glass jars is covered with enough water in the stockpot. After that, the water is heated gradually by using medium heat for 20 minutes unti the temperatures reaches 80 celsius. Next, the jars is removed from the stockpot and leave with the cool water for 15 minutes. Finally, the cooled jars are stored in the refrigerator

Task 2:
Firstly, the replacement tiles are selected to replace the broken tiles. Secondly, the grout is choosen  to match the tile’s colour. Thirdly, the broken tile are removed carefully with using flat bar. Next, the mortar is spread before laying the replacement tile by using notched trowel. After that, the grout surface is cleaned by using the damp sponge. Finally, the replacement tile is leaved to dry for at least 24 hours.

# data[].attributes.body
Task 1:
Firstly, the glass jars are sterilized in stockpot with hot water. The milk is poured in the sterilized glass jars. After that, the glass jars are covered with enough water in the stockpot.Then, the water is heated gradually with the medium heat for 20 minutes until reaches  at  celsius. Next, the jars are removed from stockpot and leave until cool water about 15 minutes. Finally, the cooled jars are stored in the refrigerator.
Task 2:
Firstly, the replacement tiles are selected to replace the broken tiles. After that, the grout is choosen to match the tile’s colour. Next, the broken tile is romoved carefully using the flat bar. Later, the motar is spread before laying the replacment tile by using notched trowel. Then, the grout surface is cleaned using damp sponge. Finally, the replacement tile are leaved to dry for at least 24 hours.

# data[].attributes.headline
NAME : MUHAMMAD RIFQI ZAINI B. RAMLI(01DTK19F1031)

# data[].attributes.subject
NAME : MUHAMMAD RIFQI ZAINI B. RAMLI(01DTK19F1031)

# data[].attributes.body
TASK 1:
Firstly, the glass jars been sterilized in the stockpot full with boiling water .After that ,take out the glass jar that has been sterilized and poor milk in it .Next ,closed the glass jar and put in the stockpot again .Next then , covered the glass jar full of milk with enough water . After that , heated the water gradually in medium heat for 20 minutes until the temperature reaches 80° Celcius .Following that ,removed the glass jar from the stockpot and put into a bucket with cool water in it and leaved the glass jar for 15 minutes .Finally ,stored the glass jar in refrigerator to make cooled glass jar.

TASK 2:

Firstly , select a replacement tiles for replace the broken tiles .After that , grout been chosen  to match the tile’s colour. Next, broken tile is removed carefully with a flat bar. Next that , spread the mortar before laying the replacement tile using notched trowel. Then , grout surface is cleaned with damp sponge. Finally, leave the replacement tile to dry at least 24 hours.

# data[].attributes.body
TASK 1:
Firstly, the glass jars are sterilized in stockpot with boiled  water. Next the milk is poured in insterilzed jars.Then covered  the glass jars with enough water in the stockpot. After that the water is heated up gradually on medium heated for about 20 minutes until it reaches 80°Celcius.Then, the jars are removed from the stockpot and leave it in cool water about 15 minutes.Finally, the cooled jar are stored in to refrigerator.

TASK 2:

Firstly, the replacement tiles are selected to replace broken tiles.Next the grout is chosen to match the tiles colour.Then  broken tiles are removed carefully by using a flat bars. Then ,motar are spread before laying the replacement tiles by using notched trowel.Leter, the grout are clean  using damp sponge. Finally the replacement tile are leaved to dry for at least 24 hours.

# data[].attributes.headline
NAME:MUHAMMAD FIKRI BIN ROSLE (01DTK19F1016)

# data[].attributes.subject
NAME:MUHAMMAD FIKRI BIN ROSLE (01DTK19F1016)

# data[].attributes.body
TASK 1:
Firstly the glass jars are sterilized in the stockpot full of boiled water.Secondly, the milk is poured into the sterilized glass jars.Next,the glass jars are covered with enough water in the stockpot.After that, the water is heated gradually on medium heat in 20 minutes until reached 80 Celsius.Than, the jars are removed from the stockpot and leave it in cool water in about 15 minutes.Finally, the cooled jars are stored in the refrigerator.

TASK 2:
Firstly the replacement tiles are selected to replace the broken tiles.Secondly,grout are choose to match tile’s colour.Next the broken tile are carefully removed by flat bar.After that the motar are spread evently before laying the replacement tile until notched trowel.Than,the grout surface are clean with a damp spongeFinally,the replacement tile are leave to dry in at least 24 hours.

# data[].attributes.headline
Name: Mohamad Afiq Bin Md Said (01DTK19F1035) 

# data[].attributes.subject
Name: Mohamad Afiq Bin Md Said (01DTK19F1035) 

# data[].attributes.body
Task 1:
Firstly,the glass jars are sterilized in stockpot with full of water. Secondly, the milk is poured in the sterilized glass jars. Then, the glass jars are covered with enough water. Next, the water are heated gradually with medium heat for 20 minutes until it reaches at 80 celcius. After that, the jars are removed from stockpot and leave it in cool water for 15 minutes. Lastly, the cooled jars are stored in the refrigerator.

Task 2:
Firstly, the replacement tiles are selected for replace the broken tiles. Secondly, the grount is choose  to match the tiles’s colour. Next, the broken tile are removed carefully using the flat bar. After that,  the mortar is spread before laying the replacement tile by using notched trowel. Next , grout surface are cleaned by damp sponge. Finally, leave it the replacement tile to dry within at least 24 hours.

# data[].attributes.headline
Name: Siti Nurina Binti Ahmad Zaini (01DTK19F1010)

# data[].attributes.subject
Name: Siti Nurina Binti Ahmad Zaini (01DTK19F1010)

# data[].attributes.body
Task 1:
First, we need to sterilize the glass jars and put some water into the stockpot. Next, pour a milk into the sterilized glass jars. Then, we must cover the glass jars and put enough water into the stockpot. After that, heat a water by medium heat in 20 minutes until reaches 80 celcius. Subsequently, remove the jars from the stockpot and leave the glass jars cool into water for 15 minutes. Last, the cooled glass jars are stored in refrigerator.

Task 2:
Firstly, select the replacement tiles and then replace the broken tiles. Next, the grout is be chosen to match the tiles colour. Then, the broken tile are removed with carefully at flat bar. After that, spread the mortar before laying the replacement tile to notched trowel. Later, replace the tiles, we have to clean the grout surface with damp sponge for it looks good. Lastly, the replacement tile must be learned to dry at least 24 hours.

# data[].attributes.headline
NAME: NURNASUHA BINTI SHAHRIL  ( 01DTK19F1013)

# data[].attributes.subject
NAME: NURNASUHA BINTI SHAHRIL  ( 01DTK19F1013)

# data[].attributes.body
TASK1
Firstly,we need to sterilizied the glass jars with a hot water in stockpot.Next, poured the milk into the glass jars that have been sterilized.Then, we need to covered the top of the glass jars with enough of water. Subsuently,heat the water until 80 celcius gradually with medium heat.Later removed the hot jar and leaved it outside to make sure the water is cool for about 15 minutes. Finally,take all the cooled jars and store it in the refrigerator

# data[].attributes.headline
Name : MOHAMAD IKMARIZAL BIN ROFI (01DTK19F1005)

# data[].attributes.subject
Name : MOHAMAD IKMARIZAL BIN ROFI (01DTK19F1005)

# data[].attributes.body
TASK 1:
Firstly,sterilized the glass jar with water in the stockpot.Next, pour the milk into the sterilized glass jars.Then, covered the glass jar with enough water filled in the stockpot.After that, water is heated gradually with medium heat in 20 minutes until reaches 80 celsius. Next, removed the jars from the stockpot and left in cool water in 15 minutes.After 15 minutes, store the cooled jars in the refrigerator.

TASK 2 :
Firstly, the broken tiles are replaced with the replacement tiles. Then, grout is chosen to match the tiles colour. After that, broken tiles are removed carefully using a flat bar. Next, before laying the replacement tile, mortar is spread with a notched towel. Thus ,grout surface is cleaned using a damp sponge. Lastly, replacement tile is leaved to dry for at least 24 hours.

# data[].attributes.body
01DTK19F1006

TASK 1:

Firstly, the glass jar must be sterilize in the stockpot with hot water. Next, pour the milk into the sterilized glass jars. After that, put the cover on glass jars then put enough water into the stockpot. The water are heated gradually with a medium heat untill temperature reaches 80 celsius in 20 minutes. Subsequently, the jars are removed from stockpot then put into the cool water and leave for 15 minutes. After 15 minutes, store the cooled jars in the refrigerator.

TASK 2 :

Firstly, select the replacment tiles then replace the broken tiles. Next, the grout are chosen to match with the tile’s color. After that, the broken tile is removed with carefully using flat bar. Spread the mortar before laying the replacment tile using notched trowel. Subsequently, the grout surface are clean up by using damp sponge. Finally, leave the replacement tile to dry, and it will take time at least 24 hours.

# data[].attributes.headline
Name : Muhammad Amirul Hadi bin Shahrudin

# data[].attributes.subject
Name : Muhammad Amirul Hadi bin Shahrudin

# data[].attributes.body
01DTK19F1023

Task 1
Firstly, the glass jars are sterilized with water in the stockpot. Next, some milk is poured into the sterilized glass jars. Then, the glass jars are covered and poured enough water into the stockpot. After that, water is heated gradually with medium heat in 20 minutes untill reaches 80 celcius..Next, the jars are removed the stockpot and left with cool water in 15 minutes. Finally, the cooled jars are stored in the refrigerators.

Task 2
Firstly, the replacement tiles are selected and replaced the broken tiles. Next, grout are choosen to match and found the tile's colour. After that, the broken tile is removed very carefully with using the flat bar.
Then, the mortar is spread before laying the replacement tile by using notch trowel. Next, the grout surface is cleaned by using damp sponge. Finally, the replacement tile is left to dry at least 24 hours.

# data[].attributes.headline
Name : Noraisyah Ashira Binti Mazlan (01DTK19F1008) 

# data[].attributes.subject
Name : Noraisyah Ashira Binti Mazlan (01DTK19F1008) 

# data[].attributes.body
Task 1 :
Firstly, sterilize the glass jars into the stockpot with water. Then pour the milk into the sterilized glass jars. After that, cover the glass jars. Then, pour the enough water into the stockpot. After that, heat the water until gradually with medium heat. Around 20 minutes reaches, to the 80 celcius. Then remove the jars from stockpot. Just leave and let it cool around 15 minutes. Lastly, stored the cooled jars into the refrigerator.

Task 2:
Firtsly, select the replacement tiles and then replace the broken tiles. After that, choose the grout to matched the tile’s colour. Then, remove the broken tile carefully and flated the bar. Next, spread the mortar before laying the replacement to notched trowel. Then, clean out the grout surface with damp sponge. Lastly, leave the replacement tile to dry at least 24 hours.

# data[].attributes.body
(01DTK19F1017)
1.Firstly,the glass jars are sterilize by us in the stockpot that filled with hot water.Then,the milk poured into he sterilize glass jars.The glass jars are covered by the enough water in the stockpot.The water is heated untill medium heat gradually.The jars are heated for 20 minutes in the water when the water reaches 80 degree celsuis.The jars are removed from stockpot and in the cool waer for 15 minutes.Lastly,the colled jars are stored in the refrigerator.

2.The broken tiles will insted by the selected replacement tiles.First,the grout is choosen to match the tile's colour.
The broken tiles are removed carefully by using the flat bar.The mortar are spread before laying the replacement tile with the notched trowel.After that,the grout surface is cleaned by damp sponge after insted the replacement tiles.Lastly,the replacement tile are leaved to dry at least 24 hours.

# data[].attributes.body
(01DTK19F1026)

Task 1
.  Firstly, the glass jar are sterilize into the stockpot with the water. Next, the milk is poured into the sterilized glass jars. Then, The glass jar are covered with enough water into the stockpot. Besides, heat the water by medium heat in 20 minutes until reaches 80 celcius. After that, remove the jars from the stockpot and leave it cool into the water for 15 minutes. Lastly, the cooled jars are stored in refrigerator.

Task2
Firstly, select the replacement tiles and replace the broken tiles. Next, the grout are chosen to match with the tile's colour. After that, the broken tile are removed with carefully at flat bar. Then, spread the mortar before laying the replacement tile to notched trowel. Following that, grout surface are cleaned by damp sponge. Finally, leave it the replacement tile to dry within at least 24 hours.

# data[].attributes.headline
NAME : Muhammad Izzaiman Bin Mohd Idris (01DTK19F1028)  

# data[].attributes.subject
NAME : Muhammad Izzaiman Bin Mohd Idris (01DTK19F1028)  

# data[].attributes.body
TASK 1 :
Firstly , the glass jars are sterilized in the stockpot with hot water. Next, the milk is poured into the sterilized glass jars. After that, the glass jars are covered from enough water in the stockpot. Next, the water will be heated in gradually medium heat around 20 minutes to reaches 80 degree Celsius. The jars are removed from stockpot and leave until it become cool water around 15 minutes. Lastly, the cooled jars stored into refrigerator.

TASK 2:
Firslty, replacement tiles must be selected to replace the broken tiles. Next, the grout must be choosen to match the tile's colour. Thirdly, the broken tile must be removed carefully with a flat bar. The mortar must be spreaded before laying the replacement tile with a notched trowel. The grout surface must be clean with a damp sponge. Lastly, the replacement tile must be leaved to dry at least 24 hours.

# data[].attributes.headline
Name: MUHAMMAD AFIQ SAUFI BIN MOHD SHAFFREE(01DTK19F1004)

# data[].attributes.subject
Name: MUHAMMAD AFIQ SAUFI BIN MOHD SHAFFREE(01DTK19F1004)

# data[].attributes.body
Task 1 :
Firstly,we have to sterilize the glass jars inside the stockpot with the water.Then,pours the milk into the sterilized glass jars.After that, cover the glass jars with the enough water in the stockpot. After that, heat the water in gradually at medium heat for 20 minutes untill that reaches to 80 celcius degree. Next, we have to remove the jars from the stockpot and leave it become cool water untill 15 minutes. Lastly, stored the cooled jars in the refrigerator.

Task 2 :
Firstly, we have to select the replacement tiles and replace the broken tiles. After that, choose the grout to matched the tile's colour. Next, remove the broken tiles with carefully and flated the bar. After that, spread the mortar before laying the replacement tile to notched trowel.Next, clean up the grout surface with damp sponge. Finally, leave the replacement tile to dry at the out at least 24 hours.

# data[].attributes.body
Task 1:
Firstly the glass jars are sterilized in the stockpot with a full of hot water. The milk is poured and put in sterilized glass jars. After that, the glass jars are covered with the enough water in the stockpot. Then the water is heated in gradually in medium is about 20 minutes until it reaches to 80 degree Celsius. Next, the jars are removed from the stockpot and leave that until it become cool water in 15 minutes. Finally, the cooled jars have stored in the refrigerator.

Task 2:
First of all, the replacement tiles are selected and replaced the broken tiles. Secondly, the grout is choosen to match the tile's colour. Thirdly, the broken tile are removed with carefully usng flat bar .After that, the mortar is spread and before laying the replacement tile wipe with the notched towel notched . Next, the grout surface is cleaned with the damp surface. Finally, the replacement tile is leave and have to dry with at least 24 hours

# data[].attributes.headline
Name:Senjev naidu a/l seenivasan (01dtk19f1002)

# data[].attributes.subject
Name:Senjev naidu a/l seenivasan (01dtk19f1002)

# data[].attributes.body
Task 1: Firstly the glass jars are sterilize in the stockpot with hot water.After that the milk is poured into the sterilized glass jar.The glass jars are covered with enough water into the stockpot.The water will be heated in medium gradually for 20 minutes reaching 80  degree Celsius  .The jars will removed from the stockpot and leave cold water for 15 minutes.the cooled jars will be stored in the refrigerator.

Task 2:
Firstly,replacement tiles must be selected accordingly to replace the broken tiles.The grout must be chosen to match the tile's colour . The broken tiles must be removed carefully with a flat bar.The mortar must be spreaded before laying the replacement tile with a notched trowel. The grout surface must be clean with a damp sponge tom avoid any dirt. The replacement tile must be leaved to dry at least 24 hours.

# data[].attributes.headline
Name: Muhammad Ridhwan Bin Norhamdan (01DTK19F1020)

# data[].attributes.subject
Name: Muhammad Ridhwan Bin Norhamdan (01DTK19F1020)

# data[].attributes.body
Task 1
Firstly, the glass jars need to be sterilized in the stockpot with a hot water. Next, the milk is poured in the sterilized glass jar. Following that, the glass jars are covered with enough water in the stockpot. After that, the water is heated gradually with medium heat for 20 minutes until it reaches 80° Celsius. Then, the glass jars are removed from the stockpot and put it in a cool water for 15 minutes. Finally, the cooled jars are stored in the refrigerator.

Task 2
Firstly, the replacement tiles are selected to replace the broken tiles. Next, the grout are chosen to match the tile’s colour. Following that, broken tile are removed carefully using the flat bar. Then, the mortar are spread before laying the replacement tile by using a notched trowel. After that, the grout surface are cleaned using a damp sponge. Finally, the replacement tile are leaved to dry for at least 24 hours.

# data[].attributes.body
Task1
Firstly,we need to sterilize the glass jars on the stockpot with the water.Then,pour the milk into the sterilized glass jar.After that,cover the glass jar with enough water in the stockpot.Then,we must heat the water a gradually with the medium heat around 20 minutes until it reaches 80 degree celcius.And then,remove the jars from the stockpot and leave until it become a cooled water for 15 minutes.Lastly,stored the cooled jars in the refrigerqtor.
Task2:
Firstly,we must select the replacement tiles and then replace the broken tiles.Then,the grout is choose to match the tile`s colour.Next,remove the broken tiles with a carefully with a flat bar.Then,spread the mortar before laying the replacement tile with a notched trowel.Next,clean the grout surface with damp sponge.Finally,leave the replacement tile to dry in at least 24 hours.

# data[].attributes.headline
Name : Muhammad Danial Hakim Bin Ahmad Idris

# data[].attributes.subject
Name : Muhammad Danial Hakim Bin Ahmad Idris

# data[].attributes.body
task 1 :
Firstly,the glass jars are sterelized in a large stockpot with full of boiled water. After that,the milk are poured into the previous sterelized glass jars.The glass jars are covered by water in a large stockpot.The water is heated gradually with medium heat for 20 minutes until the temperature reached 80 celcius.Then,remove the jars from the stockpot and leave it cool into the water for 15 minutes.Last but not least,The cooled jars are stored in refrigerator after cooling the filled glasses in cool water.

task 2 :
Firstly,the replacement tiles are selected to replace the broken tiles.After that,a matching grout are chose to match with tile’s colour.Next,The old broken tile are removed carefully with the flat bar.Use a notchel trowel to spread mortar onto the subfloor before laying the replacement tile.The grout surface are cleaned using a damp sponge.Last but not least,replacement tile will be leaved at least 24 hours until dry.

# data[].attributes.headline
Name : Muhammad Amirul Hakim bin Norhamidi (01DTK19F1014)

# data[].attributes.subject
Name : Muhammad Amirul Hakim bin Norhamidi (01DTK19F1014)

# data[].attributes.body
Task 1:
Firstly, you must sterilized the glass jars in the stockpot with water. After that, pour the milk into previously sterilized glass jars. Next, you should covered the glass jars with enough water in the stockpot. Later, heated the water gradually in medium heat for 20 minutes until it reaches a temperature of 80° Celsius. Next, you must carefully remove the jars from the stockpot and leave jars with cool water for 15 minutes. Lastly, stored the cooled jars in your refrigerator until you are ready to use them.

Task 2:
Firstly, you should selected a new matches replacement tiles to replace the broken tiles. Next, choose a colored grout to match a tile’s colour. After that, you must removed a broken tile and you should be carefully not to damage any of the flat bar. Later, Use a notched trowel to spread a mortar onto the subfloor before laying the replacement tile and also notched trowel. After that, cleaned a grout surface by used damp sponge. Lastly, you must leave a new replacement tile a few hours to dry at least 24 hours.

# data[].attributes.headline
Name : Amir Syahmi Bin Haszaidi (01dtk19f1019)

# data[].attributes.subject
Name : Amir Syahmi Bin Haszaidi (01dtk19f1019)

# data[].attributes.body
Task 1 :
Firstly , the glass jar are sterilize in the stockpot with water and take out the glass jar using clamps. Secondly , open the lid of glass jar and pour the milk into the sterilized glass jars. Thirdly , close the lid back and put into stockpot , cover the glass jars with enough water in the stockpot. After that , we must heat the water. we just using medium heat so the water will be simmers. Then , leave it for 20 minutes until the heat reaches 80° Celsius. After that , remove the glass jars and put into the other stockpot with cool waters and leave it for 15 minutes. Finally , take out the glass jars and store them into  refrigerator.

Task 2 :
First , we have to select a nice replacement tiles for the replace the broken tiles. Secondly , choose a grout for matching the tile's color. Thirdly , remove the broken tile from the wall with carefully by using flat bar. After that , before put the new tiles at the wall don't forget to spread the mortar before laying the replacement tile so that the trowel does not wrinkle. After replace the tiles , we have to clean the grout surface with damp sponge for it looks so nice. Finally , leave the replacement tile at least 24 hours for let it dry.

# data[].attributes.headline
Name : Muhammad Safwan Bin Sariffudin (01DTK19f1024)

# data[].attributes.subject
Name : Muhammad Safwan Bin Sariffudin (01DTK19f1024)

# data[].attributes.body
Task 1
Firstly, we need to sterilize the glass jar at the stockpot by using a water. Next, pour the milk and sterilized glass jars. Then, put a covered on a glass jar with enough water on the stockpot. After that,Heat the water in a way gradually in medium heat for 20 minutes until it reaches to 80 Celcius. Later, remove the jars on the stockpot and leave it with a cool water in 15 minutes. Finally, store the cooled jars in refrigerator for a long lasting.

Task2
Firstly, select the replacement tiles and replace the broken tiles.
Next, choose the grout broken tiles to match the tile’s colour.
After that, remove the broken tile with carefully until it flat bar.
Next,before laying the replacement tile spread by using mortar to notched trowel. Later, use damp sponge to clean grout surface. Finally, leave the replacement tile to dry at least 24hours.

# data[].attributes.headline
Name : Muhd Ayman Bin Zainol Abidin (01DTK19F1011)

# data[].attributes.subject
Name : Muhd Ayman Bin Zainol Abidin (01DTK19F1011)

# data[].attributes.body
TASK 1
First in stockpot the glass jars are need to sterelize by the water. Next,pour the milk with sterilized glass jars.. Then with the enough of water the glass jars need to covered in the stockpot. Then gradually heating the water in medium heat with 20 minutes untill it reaches 80 Celcius.After that, remove the jars on the stockpot and leave it with a cool water about 15 minutes. Finally, store the cooled jars in the refrigerator.

TASK 2
First, the replacement tiles are selected to replace the broken tiles. Secondly, the grout is be chosen to match the tiles colour. After that, the broken tiles are been removing by carefully untill it flat bar. Next, before laying the replacement tile the mortar need to spreaded untill it notched trowel. Then the grout surface are need to clean up by using damp sponge. Finally, leave the replacement tile to dry at least 24hours

# data[].attributes.body
Reg No: DTK19F1001
Task 1
Firstly, the glass jars are sterilize in the stockpot with the hot water. After that, pour the milk into sterilized glass jars.. Next, the glass jars are covered with enough water into the stockpot. Then ,the water will be heated in medium gradually for 20 minutes until it reaches 80 Celcius..Next , the jars are removed by the stockpot and leave it with a cool water in 15 minutes . Finally, the cooled jars are stored in the refrigerator.

Task 2
First, replacement tiles are selected to replace the broken tiles. Next, the grout is chosen to match the tile's colour. Thirdly, the broken tile are removed with carefully at flat bar. Then, before laying the replacement tile the mortar must be spreaded until it notched trowel. After that, grout surface are cleaned by damp sponge. Finally, the replacement tile is leaved to dry within at least 24 hours.

# data[].attributes.headline
Nam: Mohamad Faiz Hakimi Bin Nordin Affendi 

# data[].attributes.subject
Nam: Mohamad Faiz Hakimi Bin Nordin Affendi 

# data[].attributes.body
Reg no:01DTK19F1034
Task 1
Firstly,the glass jars are strelized in the stockpot with the water.Next, poured the milk with strelized glass jars.Then covered the glass jars with enough water in the stockpot. Then heated the water gradually in medium heat for 20 minutes until it reaches 80° celsius. After that removed the jars in the stockpot and leave at the cool water for 15 minutes. Finally,the cooled jars are stored in the refrigerator.

Task 2
Firstly, selected the replacement tiles and replace the broken tiles. The grout is choosen to match the tile's colour. Next,the broken tile are removed carefully using flet bar. Then,the mortar are spread before laying the replacement tile with notched trowel. After that, the grout surface the are cleaned with damp sponge. Finally, the replacement tile are leave to dried for at least 24 hours.

# data[].attributes.body
Instructions:

1. Complete Task 1 and Task 2.

2. Submit your answers by posting it in Padlet.