# data[].attributes.body
Charan - weighing
Position balance  , weight control

# data[].attributes.body
Akshay
Position balance
Weight control

# data[].attributes.body
Akshay
Position trimming *
Blowing time inside the trim
Delay in cutting device

Active bottom trimming
Speed bottom cutter

# data[].attributes.body
Charan -position trimming , blowing time inside the trim , delay in cutting device

active bottom trimming time , speed bottom cutter

# data[].attributes.body
Akshay
Position wait for blow mold
Position open
Open slowly up to position - speed
Position open
Position seize part
Position lifted from nozzle
Position griper axis
Top position on demolding

# data[].attributes.body
Charan - position wait for blow mold ,open slowly up to position - speed, position open  , position gripper axis  , position seize part, position liffed from nozzle , Top position on demolding , position scrap part

# data[].attributes.body
Akshay
Venting time 1
screw stop
Dosing stroke absolute

# data[].attributes.body
Charan - venting step
Venting time 1
screw stop
Dosing stroke absolute

# data[].attributes.body
Charan - position partly closed , position closed ,
position on closed blow mold
blowing time , screw turn blowing air pressure

# data[].attributes.body
Akshay
Pos partly closed
Position closed blow mold
Blowing time 1
screw turn
Blowing air pressure

# data[].attributes.body
, Charan - Extrusion parizon
Ejection stroke , Ejection speed 100% , Nozzle closing delay , Nozzle opening speed, Nozzle closing speed , Nozzle stoke at profile 100% ( segments 0 - 100) , Drawing profile ( 0- 100) , set up nozzle profile ( 0- 100) , support air parizon , injection piston profile ( 0 -100)

# data[].attributes.body
Akshay
Ejection stroke
Ejection speed 100%
Nozzle closing delayed
Nozzle opening speed
Nozzle closing speed
Nozzle stroke at profile 100%  (sigment  0 -100)
Drawing profile (sigment 0-100)
Set up nozzle cone profile
Support air parizon
Injection piston profile (0-100)

# data[].attributes.body
Charan - union
Injection profile ( segments 0,1&2) ,   drawing profile( 0 ,1& 2) ,profile nozzle segment(0,1,2) , preset pressure , pre-set press time

# data[].attributes.body
Akshay

Injection profile ( segment 0 /1/2 )
Drawing profile    ( 0 ,1 & 2 )
Profile nozzle sigment  0 ,1 & 2 )
Pre.-set pressure
Pre-set press time

# data[].attributes.body
Charan- Injection
Start point nozzle opening - position injection, Injection stroke , Injection speed ,holding pressure , holding press time

# data[].attributes.body
Akshay  - start point nozzle opening - position injection
Injection stroke
Injection speed
holding pressure
Holding press time.

# data[].attributes.headline
Option Blowing inside the boot (secret info)

# data[].attributes.subject
Option Blowing inside the boot (secret info)

# data[].attributes.body
Blowing step

# data[].attributes.body
Neck