# data[].attributes.body
Droplets formed on the lid and fresh water was in the glass. The salt was collected on the lid and in the pan.

# data[].attributes.body
The  freshwater evaporated but the salt remain in the water

# data[].attributes.body
my set-up

# data[].attributes.body
The sunlight causes the water to evaporate into water vapour and comes into contact with the cooler surface of the cling wrap, loses heat and condenses to form water droplets

# data[].attributes.body
I see water droplets on the inner side of the plastic wrap

# data[].attributes.body
This is my set-up the heat from the sun evapours the water then turns into fresh water and drop into the bowl

# data[].attributes.body
video of solar still (short) look at the water droplets

# data[].attributes.body
So, first I put a plastic sheet on top of a bowl with the water then I just wait for it to form water vapor. Then the water droplets would fall into the container.

# data[].attributes.body
I'm using a plastic container, a smaller cup, a plastic sheet, and a weight. The plastic container is used to fill the hot saltwater, then I used the smaller cup so the freshwater can be collected upon evaporation and condensation. I use the weight to put on the plastic sheet so that the water vapour collected will flow into the smaller cup. After this happens, I can drink the water from the smaller cup. This happens because:
A solar still separates water from substances dissolved in it by using heat to evaporate water so that it may be cooled and collected, thus purifying it. They are used in areas where drinking water is unavailable, so that clean water is obtained from dirty water. In a solar still, impure water is contained outside the collector, where it is evaporated by sunlight shining through clear plastic or glass. The pure water vapour condenses on the cool inside surface and drips down, where it is collected and removed.This process leaves behind impurities, such as salts and heavy metals, and eliminates microbiological organisms. The end result is pure distilled drinking water.
Source: Wikipedia

# data[].attributes.body
I managed to get a few droplets of fresh water.I think I can put something on the plastic.

# data[].attributes.body
This is my solar still and it has evaporated and turns into water vapour and then it condensed and become water droplets and becomes into water that we can drink.

# data[].attributes.body
The water absorb the salt and it will become fresh water.

# data[].attributes.body
The hot water was to represent the seawater getting heated by the sun(just now, I went out and the previous one disappeared😢)

# data[].attributes.body
This is my first Solar Still DIY.

# data[].attributes.body
The hot water was to represent the water getting heated up by the hot sun.

# data[].attributes.body
This is the set up

# data[].attributes.body
The aluminum is plastic wrap.

# data[].attributes.body
This is my final result for the project. Hope you guys enjoy watching the video! :) 😉

# data[].attributes.body
I didn't have  materials

# data[].attributes.body
My project

# data[].attributes.body
i have no materials

# data[].attributes.body
I do not have any materials to do it.

# data[].attributes.body
I have no materials

# data[].attributes.body
My DIY solar still!

# data[].attributes.body
Shivani

# data[].attributes.body
Yue Teng

# data[].attributes.body
Take a video of your projects and upload them here! Write a short description about your projects!