# data[].attributes.body
This is a pirate ship.

To re-use my plastic bottles,

I took a plastic bottle to

the hull, then to the mat,

I used spades skewers.

I made holes with spades skewers

Sails, I put leaves

colored in black with a

skull.

My little neighbor helped me.

# data[].attributes.body
This is a airplane.

To re-use my plastic bottles,

I used a pastic bottle to make

the fuselage. I made two

holes on the sides of the

bottle and then inserted the

cardboard wings and I

stuck steering with adhesive

tape. I took corks to

make turbojets.

My two little neighbor helped me.

# data[].attributes.body
This is a cannon

to re-use my plastic bottles, i cut a wheel

in the cardboard, i have connected 2 wheels

wiht a rod.

With wire i connected a cardboard slab with

bottle. And i connected all with wire.

I have put a weight on the back of the

connon.

My Grandfather helped me.

# data[].attributes.body
This is a piggy bank.

To re-use my plastic bottles, i drew eyes and stuck this

on the bottle. For legs i cut a cork and i put a cork in the

hole. I have cut above the bottle for did a hale.

My Grandfather helped me.

# data[].attributes.body
This is a " millipede" sponge-support.

at first to re-use my bottle, I cut a gap in a little bottle.

After I sticked six paws, I draw two eyes and a sticked antennas.

For finish I put the sponge into the gap and here is !

# data[].attributes.body
This is a CD-box.

At first I took a plastic bottle that I stuffed the bottom with blue stones.

I cut every other ridges of the bottle

for did a CD's compartment and for finished, I put CD's in craks.

# data[].attributes.body
This is a octopus.

I took a plastic bottle that I cut in two parts then I cut several small strips to make the tentacles of the octopus.

To make the head, I used a small plastic bowl on which I stuck two eyes and drew a mouth.

# data[].attributes.body
the second object.

I had made a wallet / kit with two corners of bottles I had left.

I then pasted the fermuture at both ends and that was it!

Bye !

# data[].attributes.body
We did a Christmas ball to decorate Christmas fir!
We melted the plastic bottle so that it is contracted and gave a round shape.

We then painted Christmas ball in red and that was it! We recycled a bottle. My sister helped me take the picture

# data[].attributes.body
This is a vase

i cut the top of the bottle

i remove the label.

put some flower on my vase,

some water .

i have a vase easy to do when friends bring

flowers.

# data[].attributes.body
this is a magazine rack

to re-use my plastic bottles ,i cut the top of the bottle,and remove the label.

with a twine i linked together the bottles for finish i put.

my magazine in the rack.

# data[].attributes.body
I took an empty bottle, a paper plate and some paper.

I put a little of paint in the paper plate, took the bottle and I soaked up it in the paint.

# data[].attributes.body
I didn't cut a bottle or filled or whatever you want, I just put a bottle into a boot to re-use it.

# data[].attributes.body
this candy dispenser, to re-use my plastic bottle, i took only one plastic bottle.

I make a opening on the top of the bottle to put the candy and i make a hole on the bottom of the bottle to take the candy.

# data[].attributes.body
This is a dehumidifier

To re-use my bottle, i cut my bottle, i reversed the top of bottle and clipped it on the bottom.

I applied a cloth on the wall of the top of bottle and put salt

# data[].attributes.body
This is recycling rainwater, to re-use my plastics bottle, I took two plastic bottle.

I make a hole to put the spout plastic for the rain falls in the bottle.

With this water we can watering plants

# data[].attributes.body
For make this Minigun we need two bottles: I cut the neck of one bottle and I putted the bottom into the second bottle. I maked a hole at arround of the bottle and I put the neck into the hole. I filled the large-capicity ammunition of glue. All the Teachers should be afraid of this Weapon, because this Weapon is specially used for aim at them automatically.

# data[].attributes.body
This is a baseball bat. I maked a baseball bat with a flute & a bottle of plastic: I cut the top of the bottle and I put the flute, I fixed the bottle and the flute with a paper & sticky tape ... Finish the music school ... This flute it's finally usefull. This a special baseball bat, because If you strike the ball this will make a random song.

# data[].attributes.body
This is a wasps trap

To re-use my bottle, i cut my bottle, i reversed the top of bottle and clipped it on the bottom.

I filled it with water+sugar and made 2 hole to hang

# data[].attributes.body
This is a fob.

To re-use my plastic bottle, I cut holes the size of my remote and I stuck four milk bottle screw top to give a car appearance.

# data[].attributes.body
This is a Bird Feeder

To Re-use my plastic bottle i cut two parallel pairs of holes and I sliped spatulas in this holes. After I filled the bottle to bird food.

I made a bird feeder with a plastic bottle.

# data[].attributes.body
By cutting the bottom of the bottle, and three palms from the length that I folded, then a nail in the top fixed to a handle or a board, the bottle screwed on its top then the scotch-taped bottom, I obtained a windmill...

# data[].attributes.body
I cut off the top of my bottle. I rolled half sheet which i put in the top I have stick the other end of the sheet has a round cardboard it gave me a glass foot

# data[].attributes.body
I cut a bottle in high bottom and I have recovered some. it gave me a fender for my bike

# data[].attributes.body
it's a pluviometer. i cut a highpart of plastic bottle, next, we put a plastic bottle outside and when a rain fell, a plastic bottle are stuffed by water, and then we can see a rain quantity fell

# data[].attributes.body
I made a flower soli, but can also make a boujoire I did not flower so I put a boujie I cut the top and bottom of a bottle, which I then Plasser another bottle I then decorated with a little basic drawing

# data[].attributes.body
I chosed to make a cup candy I cut up two bottle Then I cut the bottle on the length to make tapes Then I fold the strip and I coler the bottom of a bottle in the other and add in candy

# data[].attributes.body
It is a cup.

I started by cutting the bottom of the bottle.

Then I made the notches for give a style. And I melted the notches with the help of flame for give a appearance more corrugated.

To finish with remained the bottle, I made a bracelet.

I cut four small curved pieces and I melted the sides.

Then I added three pearls silvered.

# data[].attributes.body
They are a candlestick.

I started by cutting the bottom of the bottle.

Then, I cut as a function of the ridges so that it makes five petals. Then, with the help of flame I melted the plastic for give original form.

To finish, I did the same with the top of the bottle to form a flower bud.

# data[].attributes.body
Burn encens

To re use my plastic bottle, I cut one bottles in three parts, I keept the longest part and the buttom, I assembled the two parts then I have drilled many holes for inserted the encens sticks.

# data[].attributes.body
Hourglass

To re-use my plastic bottle, I cut two bottles in three parts.And I assembled the neck of the bottle and the buttom of the bottle, I have drilled five holes on the top and I linked the two bottle by the top after stuffed one of the bottle with salt.

# data[].attributes.body
it's a water fountain.

it's a plastic bottle in which i drilled some short gap.

we digged then a gap in the earth in the middle of plants in which we put a plastic bottle.

next, we stuffed a bottle with a water, and a plants were sprayed directly they roots.

# data[].attributes.body
This is my rocket "MIGNARD 1"

To re-use my bottles, I cut the top and

the bottom of my first bottle that I scotched

on the second turned-around bottle.

finaly I stick three little wing.

# data[].attributes.body
This is a plastic bird table .

To re-use my plastic bottles , I took some rods across plastics bottles for birds if they want land . I put some seed in plastic bottles . The object hang up with a a rope on a tree

# data[].attributes.body
This is a Jet-pack

To re-used my plastics bottles, I just have

scotched 2 bottles in my back

by the label.

The 2 bottles are attached on me by their label.

Here, the function of the label is to make same utility than braces. I would have liked more for this invention...

# data[].attributes.body
This is a pitcher. To re-used my plastics bottles, I've created 2 holes in the bottles for inserted the handle. I removed the top of the bottle, and the handle is a part of the top.

After, I cut a notch so as to the water could flow outside the bottle.

# data[].attributes.body
This is a candle-support

To re-use my bottle, I cut the bottle and

I kept the botton of my bottle.

I add sand into my support and I put

my candle on this.

# data[].attributes.body
This is a bottle-box

At first, I have cut off the bottom of two water bottle.

I have made the same hole in the two bottle. For insert a bottle in the other, I have cut a line at the first bottle, insert it in the second, and aligned the two hole.

At the end, I have drawn with a marker the black lines

For open or close de box, you just need to rotate the bottles and its make misalignment or alignment with the holes.

# data[].attributes.body
This is a phone-dock

To re-use my bottle, i cut off two bottom of plastic bottle

-the first bottom is a bottom of milk bottle. I have cut it so as the hole take the form of the second bottom.

-the second bottom is a bottom of water bottle, and i cut it at the vertical.

I have made two hole in the two bottom, for insert the charging cable

I have finished by the lines with a black marker.

# data[].attributes.body
This is a " millipede" sponge-support.

at first to re-use my bottle, I cut a gap in a little bottle.After I sticked six paws, I draw two eyes and a sticked antennas. for finish

I put the sponge into the gap and

here is !

# data[].attributes.body
I have uses my plastic bottle in a insect trick,I have cut the top and I have put a fruit syrup and I have tourned around the top and the trick is ready

# data[].attributes.body
I chose to make flowerpots with a plastic bottle.

I took several plastic bottles,

I cut them in two to put in it of the ground then a plant.

# data[].attributes.body
This is a airplane.

To re-use my plastic bottles,

I used a pastic bottle to

the fuselage. I made two

holes on the sides of the

bottle and then insert the

cardboard wings and I

stuck steering with adhesive

tape. I took corks to

make turbojets.

My two little neighbor helped me.

# data[].attributes.body
This is a pirate ship.

To re-use my plastic bottles,

I took a plastic bottle to

the hull, then to the mat,

I used spades skewers.

Sails, I put leaves

colored in black with a

skull.

My little neighbor helped me.

# data[].attributes.body
To re-use my plastic bottles, I cut off the tops and attached them all together with string. This was not easy and my son helped me. I then made holes with a screwdriver to add the decorations and I tied a piece of ribbon around the final object. Now it is a sweets-holder or a pen-holder.

# data[].attributes.body
Fifty uses for a plastic bottle ????

# data[].attributes.body
To re-use my plastic bottle, I screwed the plastic top on and I cut the bottom half of the bottle off with a sharp knife. I was then able to use the bottle as a scooper to fill my bird-feeder with peanuts for the birds. I then hung the feeder in a tree in my garden for the winter.