# data[].attributes.body
Label each numbered portion of the diagram.

~Ms Marlena

# data[].attributes.body
How does an overtriturated amalgam mix appear?

~Ms Marlena

# data[].attributes.body
Place the composite filling steps in the correct order.

a. Apply bonding agent and cure

b. Apply composite and light cure (layers if needed)

c. Apply Etchant

d. Rinse and Dry

e. Isolate Tooth

f. Give post-op instructions and document in treatment notes

g. Patient is given anesthetic and shade is chosen

h. Polish and adjust bite as needed

i. Remove isolation materials.

~Ms Marlena

# data[].attributes.body
How many types of gypsum classifications are there according to ADA specifications?

~Ms Marlena

# data[].attributes.body
List the common uses of alginate impressions.

~Ms Marlena

# data[].attributes.body
List the common causes of root sensitivity.

~Ms Marlena

# data[].attributes.body
Why do we study Dental Materials?

~Ms Marlena

# data[].attributes.headline
Over triturated amalgam will look very shiny and overly wet

# data[].attributes.subject
Over triturated amalgam will look very shiny and overly wet

# data[].attributes.body
What is amalgam made up of?

- Sarah Treutelaar

# data[].attributes.headline
1. Cement 2. Restoration 3. Base 4. Liner 

# data[].attributes.subject
1. Cement 2. Restoration 3. Base 4. Liner 

# data[].attributes.body
What are the three uses of IRM?

- Sarah Treutelaar

# data[].attributes.headline
There are 5 types of gypsum classifications: impression plaster, model plaster, dental stone,  die stone- high-strength/low-expansion stone, and die stone- high-strength/high-expansion stone. 

# data[].attributes.subject
There are 5 types of gypsum classifications: impression plaster, model plaster, dental stone,  die stone- high-strength/low-expansion stone, and die stone- high-strength/high-expansion stone. 

# data[].attributes.body
What method should you use when mixing gypsum?

- Sarah Treutelaar

# data[].attributes.headline
*Amalgam is composed of sliver-based alloy mixed with mercury

# data[].attributes.subject
*Amalgam is composed of sliver-based alloy mixed with mercury

# data[].attributes.body
How is dental amalgam used as a restorative material in dentistry?

-Alexandria Nowell

# data[].attributes.headline
Three uses of IRM is temporary cement, temporary restoration and low strength base 

# data[].attributes.subject
Three uses of IRM is temporary cement, temporary restoration and low strength base 

# data[].attributes.body
What is Mixing RelyX used for?

-Alexandria Nowell

# data[].attributes.headline
Common causes of root sensitivity can be root caries, improper use of brushing teeth, abfraction due to bruxism, erosion by acids, leaking restoration on the root, scaling, and root planing.

# data[].attributes.subject
Common causes of root sensitivity can be root caries, improper use of brushing teeth, abfraction due to bruxism, erosion by acids, leaking restoration on the root, scaling, and root planing.

# data[].attributes.body
What are ways to treat tooth sensitivity?

- Sarah Treutelaar

# data[].attributes.headline
Tooth sensitivity can be treated using potassium nitrate to calm the nerve, stannous fluoride, composite resin or varnish to block the dentin tubules, and mouthguard to prevent grinding. 

# data[].attributes.subject
Tooth sensitivity can be treated using potassium nitrate to calm the nerve, stannous fluoride, composite resin or varnish to block the dentin tubules, and mouthguard to prevent grinding. 

# data[].attributes.body
How does fluoride protect the teeth from caries?

-Alexandria Nowell

# data[].attributes.body
What are the uses of glass ionomer cement restorative materials, and what are their advantages and disadvantages?

-Alexandria Nowell

# data[].attributes.headline
Common uses of alginate impressions are for permanent restoration such as crowns and bridge procedures.                                                                                  ****Review Chapter 5 Irreversible Hydrocolloid****~Ms Marlena

# data[].attributes.subject
Common uses of alginate impressions are for permanent restoration such as crowns and bridge procedures.                                                                                  ****Review Chapter 5 Irreversible Hydrocolloid****~Ms Marlena

# data[].attributes.body
What is wrong with this alginate impression? What would I have done differently?

-Alexandria Nowell

# data[].attributes.headline
Glass ionomer cements can be used as a luting agent, a liner, a base, and a pit and fissure sealant. It can also be used for temporary restorations or class III and V restorations. Advantages: releases fluoride, binds to enamel and dentin, is biocompatible, and has minimal micro-leakage. Disadvantages: low wear resistance, is weak to high stress areas, and can be sensitive to moisture in the first 24 hours.  

# data[].attributes.subject
Glass ionomer cements can be used as a luting agent, a liner, a base, and a pit and fissure sealant. It can also be used for temporary restorations or class III and V restorations. Advantages: releases fluoride, binds to enamel and dentin, is biocompatible, and has minimal micro-leakage. Disadvantages: low wear resistance, is weak to high stress areas, and can be sensitive to moisture in the first 24 hours.  

# data[].attributes.body
****Another advantage is that Glass Ionomer has a similar coefficient of thermal expansion as tooth structure. Meaning it will expand and contract similarly in response to hot and cold.****

What are the benefits of a cement that releases fluoride?

- Sarah Treutelaar

# data[].attributes.headline
We study dental materials to enhance safety, awareness, maintain materials properly, deliver correctly and to educate patients.  

# data[].attributes.subject
We study dental materials to enhance safety, awareness, maintain materials properly, deliver correctly and to educate patients.  

# data[].attributes.body
Chapter 3: Match these key terms below to their correct definition:

A. Permanent Restoration

B. Temporary Restoration

C. Intermediate Restoration

____ restorations expected to last several days or weeks

____ restorations expected to last several weeks to months

___ restorations expected to be long lasting

-Alexandria Nowell

# data[].attributes.headline
The alginate impression is slightly off-center, and the teeth could have been placed more firmly into the impression.

# data[].attributes.subject
The alginate impression is slightly off-center, and the teeth could have been placed more firmly into the impression.

# data[].attributes.body
How many scoops of alginate are required for a maxillary and mandibular tray?

- Sarah Treutelaar

# data[].attributes.headline
B (Temporary restoration): Restorations expected to last several days or weeks                                                   C (Intermediate restoration): Restorations expected to last several weeks to months                                        A (Permanent restoration): Restorations expected to be long lasting                                                                                                                                        

# data[].attributes.subject
B (Temporary restoration): Restorations expected to last several days or weeks                                                   C (Intermediate restoration): Restorations expected to last several weeks to months                                        A (Permanent restoration): Restorations expected to be long lasting                                                                                                                                        

# data[].attributes.body
Which restorative material is the most soluble?

- Lydia Pisarski

# data[].attributes.headline
Glass ionomer is the most soluble restorative material

# data[].attributes.subject
Glass ionomer is the most soluble restorative material

# data[].attributes.body
Ch. 2: What is the difference between direct and indirect restorations?

- Sarah Treutelaar

# data[].attributes.headline
The benefit of using a cement that releases fluoride is that it has significant anti-carries benefits. It will strengthen the tooth enamel and suppress the growth of bacteria.

# data[].attributes.subject
The benefit of using a cement that releases fluoride is that it has significant anti-carries benefits. It will strengthen the tooth enamel and suppress the growth of bacteria.

# data[].attributes.body
Which acid is the most commonly used to etch the tooth for a bonding procedure?

- Lydia Pisarski

# data[].attributes.headline
Direct restorations are immediate, directly into the tooth, and one appointment. Indirect restorations are customized replacements that are made outside of the mouth and usually two appoints.

# data[].attributes.subject
Direct restorations are immediate, directly into the tooth, and one appointment. Indirect restorations are customized replacements that are made outside of the mouth and usually two appoints.

# data[].attributes.body
Ch 2: What factors affect bonding strength?

Ava Wroblewski

# data[].attributes.headline
Maxillary is three scoops and mandibular is two scoops. 

# data[].attributes.subject
Maxillary is three scoops and mandibular is two scoops. 

# data[].attributes.body
What are the three key properties of impressions?

-Ava Wroblewski

# data[].attributes.headline
The method you should use is spatulation.

# data[].attributes.subject
The method you should use is spatulation.

# data[].attributes.body
What is the difference between diagnostic casts, working casts, and dies?

Ava Wroblewski

# data[].attributes.headline
The three key properties of impressions are accuracy, tear resistance, and dimensional stability.

# data[].attributes.subject
The three key properties of impressions are accuracy, tear resistance, and dimensional stability.

# data[].attributes.body
Which elastic impression material is the least accurate?

A. Polyvinyl siloxane

B. Polyether

C. Vinyl polyether silicone hybrid

D. Alginate

- Lydia Pisarski

# data[].attributes.body
What are the components of composite?

Ava Wroblewski

# data[].attributes.body
How does water temperature affect setting time?

-Ellysania Rodriguez

# data[].attributes.headline
Diagnostic cast are made from dental plaster or stone used for patient education.  Working cases made from dental stone that are strong enough to resist the stresses and fabrications an indirect replicas and dies are replicas of the prepared teeth that are generally removable from the working models.  

# data[].attributes.subject
Diagnostic cast are made from dental plaster or stone used for patient education.  Working cases made from dental stone that are strong enough to resist the stresses and fabrications an indirect replicas and dies are replicas of the prepared teeth that are generally removable from the working models.  

# data[].attributes.body
Place the Manipulating Gypsum steps in the correct order.

A. Measures out 45 -50 ml of water in graduated cylinder (this may vary depending on lab temperature) and pours into mixing bowl.

B. Weighs out 100g of gypsum into second mixing bowl.

C.Uses spatula to slowly incorporate gypsum into water

D.Adds gypsum to water in steady increments allowing it to settle

E.Mixes until smooth and creamy

F.Donns PPE.

G.Places bowl on dental vibrator and lightly presses and rotates bowl until air bubbles rise to surface

H.Gathers appropriate armamentarium

I. Verbalizes when the mixture would be ready to be used to pour models

-Alexandria Nowell

# data[].attributes.headline
RelyX is used for the cementation of restorations.

# data[].attributes.subject
RelyX is used for the cementation of restorations.

# data[].attributes.body
What are the properties of luting cements?

Ava Wroblewski

# data[].attributes.body
What is the part of a study model that holds the teeth and soft tissue?

- Lydia Pisarski

# data[].attributes.headline
Fluoride interferes with the essential enzyme activity in bacteria. Fluoride travels as hydrofluoric acid and its ions disrupt the ions of the decay causing bacteria ions and causing its death.

# data[].attributes.subject
Fluoride interferes with the essential enzyme activity in bacteria. Fluoride travels as hydrofluoric acid and its ions disrupt the ions of the decay causing bacteria ions and causing its death.

# data[].attributes.body
What is the difference between intrinsic stains and extrinsic stains?

Ava Wroblewski

# data[].attributes.headline
Dental amalgam is used to fill cavities.

# data[].attributes.subject
Dental amalgam is used to fill cavities.

# data[].attributes.body
What are the three different alloy particle shapes?

Ava Wroblewski

# data[].attributes.headline
*The three particle shapes are lathe-cut, admix, and spherical alloys.

# data[].attributes.subject
*The three particle shapes are lathe-cut, admix, and spherical alloys.

# data[].attributes.body
Where should you put scrap amalgam?

- Lydia Pisarski

# data[].attributes.headline
Intrinsic stains are cause by medical conditions, medication, aging, or trauma. Extrinsic stains are caused by food, tobacco and drinks like red wine or coffee. 

# data[].attributes.subject
Intrinsic stains are cause by medical conditions, medication, aging, or trauma. Extrinsic stains are caused by food, tobacco and drinks like red wine or coffee. 

# data[].attributes.body
Why do soft-tissues need to be protected when receiving in-office whitening?

-Ellysania Rodriguez

# data[].attributes.headline
The properties of luting cements include strength, solubility, viscosity, biocompatibility, retention, esthetics, radiopacity, and ease of manipuilation.

# data[].attributes.subject
The properties of luting cements include strength, solubility, viscosity, biocompatibility, retention, esthetics, radiopacity, and ease of manipuilation.

# data[].attributes.body
Why might you place an insulating base under restorations?

- Lydia Pisarski

# data[].attributes.headline
An insulating base provides chemical and thermal protection to the pulp. 

# data[].attributes.subject
An insulating base provides chemical and thermal protection to the pulp. 

# data[].attributes.body
What is Polymerization?

-Ellysania Rodriguez

# data[].attributes.headline
Soft tissues need to be protected during in-office whitening because if any liquid contacts the soft tissues it can cause a chemical burn and can cause sloughing of the tissue and may be painful.

# data[].attributes.subject
Soft tissues need to be protected during in-office whitening because if any liquid contacts the soft tissues it can cause a chemical burn and can cause sloughing of the tissue and may be painful.

# data[].attributes.body
How does fluoride help protect the teeth from decay?

- Lydia Pisarski

# data[].attributes.headline
Factors that affect bonding strength is moisture control, removal smear layer, and being cured. 

# data[].attributes.subject
Factors that affect bonding strength is moisture control, removal smear layer, and being cured. 

# data[].attributes.body
What's the difference splatter and aerosols?

-Ellysania Rodriguez

# data[].attributes.headline
Scarp amalgam goes into a designated scrap container and then picked up by a hazardous waste company. It can also be mailed depending on the office's protocol. 

# data[].attributes.subject
Scarp amalgam goes into a designated scrap container and then picked up by a hazardous waste company. It can also be mailed depending on the office's protocol. 

# data[].attributes.body
How long does an amalgam restoration last?

-Ellysania Rodriguez

# data[].attributes.headline
The components of composites are organic resin matrix that are tooth colored, color pigments, saline coupling agent, and inorganic filler particles. 

# data[].attributes.subject
The components of composites are organic resin matrix that are tooth colored, color pigments, saline coupling agent, and inorganic filler particles. 

# data[].attributes.body
What is the purpose of bioactive dental materials?

-Ellysania Rodriguez

# data[].attributes.headline
The part of the study model that holds the teeth and soft tissue is the base.  

# data[].attributes.subject
The part of the study model that holds the teeth and soft tissue is the base.  

# data[].attributes.body
Why is it important to use the vibrator after mixing gypsum?

-Ellysania Rodriguez

# data[].attributes.headline
Splatter is small particles that may contain blood, saliva, oral particulate matter, water, and microbes. Splatter is typically greater than 50um and land quickly. Aerosols are smaller particles that can be airborne for hours and can cause respiratory infection if inhaled.

# data[].attributes.subject
Splatter is small particles that may contain blood, saliva, oral particulate matter, water, and microbes. Splatter is typically greater than 50um and land quickly. Aerosols are smaller particles that can be airborne for hours and can cause respiratory infection if inhaled.

# data[].attributes.body
What are the three different types of force? -Kylie Burton

# data[].attributes.headline
Warm water causes a faster setting time. Cold water slows setting time.

# data[].attributes.subject
Warm water causes a faster setting time. Cold water slows setting time.

# data[].attributes.body
What is the difference between a reversible hydrocolloid and an irreversible hydrocolloid? -Kylie Burton

# data[].attributes.headline
Bioactive dental materials interact with living tissue and initiate repair or regeneration.

# data[].attributes.subject
Bioactive dental materials interact with living tissue and initiate repair or regeneration.

# data[].attributes.body
What are filler particles composed of? -Kylie Burton

# data[].attributes.headline
Typically, amalgam lasts 7-15 years. However, some have lasted 40-50 years. There are a lot of factors that affect longevity.

# data[].attributes.subject
Typically, amalgam lasts 7-15 years. However, some have lasted 40-50 years. There are a lot of factors that affect longevity.

# data[].attributes.body
Is amalgam considered safe for human use? -Kylie Burton

# data[].attributes.headline
Polymerization is the forming polymers by chemically linking monomers into long chains. It can be activated by chemicals, heat, or light.

# data[].attributes.subject
Polymerization is the forming polymers by chemically linking monomers into long chains. It can be activated by chemicals, heat, or light.

# data[].attributes.body
What is eugenol good for? -Kylie Burton

# data[].attributes.headline
Fluoride helps by making it more difficult for acids created by cariogenic bacteria to demineralize the tooth structure and cause caries.

# data[].attributes.subject
Fluoride helps by making it more difficult for acids created by cariogenic bacteria to demineralize the tooth structure and cause caries.

# data[].attributes.body
What is fluorosis? -Kylie Burton

# data[].attributes.headline
It's important to use a vibrator after mixing gypsum to help release trapped airbubbles. This can help prevent voids in the poured model.

# data[].attributes.subject
It's important to use a vibrator after mixing gypsum to help release trapped airbubbles. This can help prevent voids in the poured model.

# data[].attributes.body
How do the properties of gypsum change with more or less water? -Kylie Burton

# data[].attributes.headline
the three different types are force are compressive force (like biting, posterior teeth are made for this), tensile force (like stretching or pulling an object apart), shearing force (two surfaces sliding in opposite directions against each other, your maxillary and mandibular incisors side against each other to cut food)

# data[].attributes.subject
the three different types are force are compressive force (like biting, posterior teeth are made for this), tensile force (like stretching or pulling an object apart), shearing force (two surfaces sliding in opposite directions against each other, your maxillary and mandibular incisors side against each other to cut food)

# data[].attributes.body
what are primary and secondary bonds?

Faith Thorson

# data[].attributes.headline
a reversible hydrocolloid can go back and forth between gel and liquid (it is reversible) and is set by a physical change (temperature). where irreversible hydrocolloid cannot be reversed and is set by a chemical reaction.

# data[].attributes.subject
a reversible hydrocolloid can go back and forth between gel and liquid (it is reversible) and is set by a physical change (temperature). where irreversible hydrocolloid cannot be reversed and is set by a chemical reaction.

# data[].attributes.body
what are the 4 elastomer materials, and what are the setting reactions of each of them?

Faith Thorson

# data[].attributes.headline
if execess water if added to gypsum then the mixture will be thinner, flow easier, and set slower, once it has set it will be weaker, less accurate, more porosity, softer, and lightly less setting expansion, and will have voids. but if there is less water added, it will be thicker, harder to mix and pour, sets faster, stronger final cast, less porosity, denser, and slightly more setting expansion. it will have fewer voids, and stronger.  

# data[].attributes.subject
if execess water if added to gypsum then the mixture will be thinner, flow easier, and set slower, once it has set it will be weaker, less accurate, more porosity, softer, and lightly less setting expansion, and will have voids. but if there is less water added, it will be thicker, harder to mix and pour, sets faster, stronger final cast, less porosity, denser, and slightly more setting expansion. it will have fewer voids, and stronger.  

# data[].attributes.body
what are the properties of model plaster and what is it used for?

****What is dental stone and die stone used for?**** ~Ms Marlena

-Faith Thorson

# data[].attributes.headline
filler particles are composed of quartz, silica, or glass                                                                                 ****Do filler particles increase wear resistance or decrease wear resistance?****

# data[].attributes.subject
filler particles are composed of quartz, silica, or glass                                                                                 ****Do filler particles increase wear resistance or decrease wear resistance?****

# data[].attributes.body
what are the 6 different types of caries and where are they located?

Faith Thorson

# data[].attributes.headline
amalgam is considered safe, even though it has been questioned in recent years due to the mercury in it, but it is a very small amount that is released but this amount will harm the patient.  

# data[].attributes.subject
amalgam is considered safe, even though it has been questioned in recent years due to the mercury in it, but it is a very small amount that is released but this amount will harm the patient.  

# data[].attributes.body
what is creep?

# data[].attributes.headline
eugenol is good for soothing the pulp and has antibiotic properties. it's also good for temporary restorations, temporary cementations, and reducing pain.                                                                                 ****Which product contains eugenol?**** ~Ms Marlena

# data[].attributes.subject
eugenol is good for soothing the pulp and has antibiotic properties. it's also good for temporary restorations, temporary cementations, and reducing pain.                                                                                 ****Which product contains eugenol?**** ~Ms Marlena

# data[].attributes.body
what are the two categories of luting cements?

Faith Thorson

# data[].attributes.headline
fluorosis is an enamel condition caused by ingesting excessive fluoride. it looks like little white spots on the surface of the teeth.                                   ****Can the spots also be brown?***** ~Ms Marlena

# data[].attributes.subject
fluorosis is an enamel condition caused by ingesting excessive fluoride. it looks like little white spots on the surface of the teeth.                                   ****Can the spots also be brown?***** ~Ms Marlena

# data[].attributes.body
how do you treat intrinsic tooth stains?

Faith Thorson

# data[].attributes.body
-Faith Thorson

# data[].attributes.headline
Primary bonds are strong bonds that bind the atoms of the molecule. Secondary bonds are weaker bonds that act as adhesive forces between molecules.

# data[].attributes.subject
Primary bonds are strong bonds that bind the atoms of the molecule. Secondary bonds are weaker bonds that act as adhesive forces between molecules.

# data[].attributes.body
What are the three states of matter?

Emmy Streator

# data[].attributes.headline
the four elastomer materials are polysulfides, condensation silicones, addition silicones, and polyether's. The setting reaction for polysulfide is condensation polymerization, the setting reaction for polysulfide and condensation silicone are both condensation polymerization. The setting reaction for addition silicone is addition polymerization. The setting reaction for polyether is cationic ring-opening polymerization. 

# data[].attributes.subject
the four elastomer materials are polysulfides, condensation silicones, addition silicones, and polyether's. The setting reaction for polysulfide is condensation polymerization, the setting reaction for polysulfide and condensation silicone are both condensation polymerization. The setting reaction for addition silicone is addition polymerization. The setting reaction for polyether is cationic ring-opening polymerization. 

# data[].attributes.body
What happens to the impression material when it flows and locks into an undercut?

Emmy Streator

# data[].attributes.headline
model plaster has a water to powder ratio of .45 ML of water per 100g of powder. It is used for diagnostic casts and articulation of stone casts.

# data[].attributes.subject
model plaster has a water to powder ratio of .45 ML of water per 100g of powder. It is used for diagnostic casts and articulation of stone casts.

# data[].attributes.body
Which gypsum product is the least costly of the 5 gypsum products?

Emmy Streator

# data[].attributes.headline
creep is the slow deformation of an amalgam restoration due to stress like chewing.

# data[].attributes.subject
creep is the slow deformation of an amalgam restoration due to stress like chewing.

# data[].attributes.body
What is burnishing?

Emmy Streator

# data[].attributes.headline
The two categories of luting cements are water-based and resin-based cements

# data[].attributes.subject
The two categories of luting cements are water-based and resin-based cements

# data[].attributes.body
What are dental cements composed of?

Emmy Streator

# data[].attributes.headline
You treat intrinsic tooth stains by whitening materials if they cannot be polished or scaled away.

# data[].attributes.subject
You treat intrinsic tooth stains by whitening materials if they cannot be polished or scaled away.

# data[].attributes.body
explain the history of peroxide whitening

Emmy Streator

# data[].attributes.body
Solid, liquid, and gas

Chapter 2

What material is used to prevent caries on the pits and fissures?

Kristen Tobin

# data[].attributes.body
It hardens, distorts, tears, and must snap

Chapter 5

What kind of impressions can be made with alginate?

Kristen Tobin

# data[].attributes.body
Model Plaster

Chapter 6

What happens to gypsum when the water to powder ratio is off?

Kristen Tobin

# data[].attributes.body
Class 1-Occlusal surfaces

Class 2-Proximal molars and premolars **MO, DO**

Class 3-Proximal anterior teeth, no incisal edge **MF, DF**

Class 4-Proximal anterior teeth involving incisal edge **MILF, DILF**

Class 5-Gingival 3rd **L5,B5**

Class 6-Incisals of anteriors and posterior cusps

Chapter 7

How long does etch sit on a tooth before it is rinsed?

Kristen Tobin

# data[].attributes.body
Burnishing is smoothing the tooth after the composite is packed into it

Chapter 11

What happens when amalgam becomes tarnished?

Kristen Tobin

# data[].attributes.body
With whitening products in office

****Can home whitening products also be used? **** ~Ms Marlena

What is power whitening?

Kristen Tobin

# data[].attributes.body
Define viscosity

~Ms Marlena

# data[].attributes.headline
Power whitening is a procedure that is done in the dental office using a strong light and peroxide to achieve fast results. 

# data[].attributes.subject
Power whitening is a procedure that is done in the dental office using a strong light and peroxide to achieve fast results. 

# data[].attributes.body
Describe the purpose of a sports mouthguard, a space maintainer, orthodontic tooth aligners and a nightguard.

~Ms Marlena

# data[].attributes.headline
*The amalgam's surface layer becomes oxidized. This does not affect the mechanical properties and be polished off. 

# data[].attributes.subject
*The amalgam's surface layer becomes oxidized. This does not affect the mechanical properties and be polished off. 

# data[].attributes.body
*What is corrosion?

~Ms Marlena

# data[].attributes.headline
15 seconds or according to manufacturer's instructions

# data[].attributes.subject
15 seconds or according to manufacturer's instructions

# data[].attributes.body
Explain the setting reaction for restorative compomers

Emmy Streator

# data[].attributes.body
It was known as walking bleach for necrosis teeth and soon carbamide was introduced for whitening in 1990

Chapter 16

How are brackets bonded to teeth?

Kristen Tobin

# data[].attributes.body
A liquids ability to resist flow.

List 4 mechanical properties.

Avani

# data[].attributes.body
Diagnostic study models, orthodontic retainers, whitening trays, and mouth guards.

What are three permanent restorations?

Avani M

# data[].attributes.body
It will mess up the consistency of the gypsum.

What are study models used for?

Avani M

# data[].attributes.body
A dual setting mechanism.

Are flowable composites low OR high viscosity?

Avani M

# data[].attributes.body
.A electrochemical reaction with other metals because of the acid or moisture present in the oral environment.

What is a lathe-cut alloy?

Avani

# data[].attributes.body
Etching the enamel, applying a primer, and curing an adhesive.

What is buildup?

Avani M

# data[].attributes.body
Sports mouth guard: protect the teeth while playing sports.

Night guard: protect the teeth from things such as grinding when sleeping.

Space Maintainer: Hold open the space left by the loss of a baby tooth.

Tooth Aligner: Helps straighten teeth.

What is destructive sleep apnea?

Avani M

# data[].attributes.headline
We study dental materials for efficacy, proper safety protocol, correct use of applying materials, and to improve our patient.

# data[].attributes.subject
We study dental materials for efficacy, proper safety protocol, correct use of applying materials, and to improve our patient.

# data[].attributes.body
what is the difference between elastic and inelastic materials?

halle morgan

# data[].attributes.headline
common uses for alginate impressions can be, mouth guards, retainers, study models , and orthodontic appliances.

# data[].attributes.subject
common uses for alginate impressions can be, mouth guards, retainers, study models , and orthodontic appliances.

# data[].attributes.body
what is the correct criteria for evaluating an alginate impression?

-halle morgan

# data[].attributes.headline
there are 5 types of classifications, those being impression plaster, model  plaster, dental stone, die stone, high strength/low expansion, and high strength/high expansion 

# data[].attributes.subject
there are 5 types of classifications, those being impression plaster, model  plaster, dental stone, die stone, high strength/low expansion, and high strength/high expansion 

# data[].attributes.body
between all of these, which one is most commonly used?

halle morgan

# data[].attributes.headline
1.patient is given anesthetic and shade is chosen. 2.isolate tooth. 3.apply etchant. 4.rinse and dry. 5.apply bonding agent and cure. 6.apply composite and light cure. 7 .remove isolation materials. 8. polish and adjust bite as needed. 9.give post op instructions and document in treatment notes.

# data[].attributes.subject
1.patient is given anesthetic and shade is chosen. 2.isolate tooth. 3.apply etchant. 4.rinse and dry. 5.apply bonding agent and cure. 6.apply composite and light cure. 7 .remove isolation materials. 8. polish and adjust bite as needed. 9.give post op instructions and document in treatment notes.

# data[].attributes.body
what is a primary mechanism to which glass ionomer cements bond to the tooth structures?

halle morgan

# data[].attributes.body
why is mercury essential for amalgam?

halle morgan

# data[].attributes.body
what is most used RelyX, or IRM?

Halle morgan

# data[].attributes.headline
some common causes of root sensitivity can be abfraction, acids, scaling, bristle on tooth brush (aggression), and unprotected tooth roots.

# data[].attributes.subject
some common causes of root sensitivity can be abfraction, acids, scaling, bristle on tooth brush (aggression), and unprotected tooth roots.

# data[].attributes.body
can root sensitivity be treated with desensitizing toothpaste?

halle morgan