# data[].attributes.body
Are critical to the safety and effectiveness of maritime operations. Very high frequency (VHF) radiotelephones are mainly used to establish clear and fast communications between land and sea stations.

These communications are essential for exchanging messages of danger, urgency and safety, with specific frequencies for calls and distress traffic on VHF and Medium Wave.In emergency situations, different messages are used: "MAYDAY" for serious and imminent danger, "PAN-PAN" for urgent safety-related messages, and "SECURITÉ" for messages on the safety of navigation or important weather warnings.

These four devices will help sailors and cruisers communicate while at sea

1. Garmin InReach Satellite Tracker

2. Thuraya Satsleeve Plus Satellite Phone System

3. Iridium GO Satellite Hotspot

4. Mobile Phone with WiFi-Boosting Hotspot Device

# data[].attributes.headline
-Draft Standard Marine Communication -Phrases

# data[].attributes.subject
-Draft Standard Marine Communication -Phrases

# data[].attributes.body
Preparation Phase:

"This is [Vessel Name] conducting radio check, over."

"Port Control, this is [Vessel Name], requesting departure clearance, over."

"Confirming weather forecast for [departure date/time]."

"Reviewing voyage plan, any navigational advisories to be aware of?"

Departure Phase:

"Port Control, this is [Vessel Name], departing [Port Name] bound for [Destination], over."

"All stations, this is [Vessel Name], stand by for departure maneuvers, over."

"Requesting clearance to maneuver, over."

"Confirming radio channels for departure procedures."

Transit Phase:

"VTS, this is [Vessel Name], requesting passage through [Area Name], over."

"All stations, be advised of our course alteration to avoid [obstacle/hazard], over."

"Monitoring Channel [X] for navigational warnings and updates, over."

"Requesting passing arrangement with vessel [Vessel Name] at [Location], over."

Arrival Phase:

"Port Control, this is [Vessel Name], requesting berth assignment and clearance, over."

"Reporting ETA [Estimated Time of Arrival] at [Port Name], over."

"Preparing for pilotage assistance, standby for instructions, over."

"Requesting tugboat assistance for docking maneuvers, over."

Moored Phase:

"Port Control, this is [Vessel Name], reporting moored status, over."

"Monitoring Channel [X] for any emergency calls or navigational updates, over."

"Confirming completion of cargo operations, over."

"Requesting permission for personnel transfers, over."

Departure from Berth Phase:

"Port Control, this is [Vessel Name], preparing to depart berth, over."

"All stations, standby for departure procedures, over."

"Confirming clearance to maneuver, over."

"Requesting tugboat assistance for departure, over."

Transit Out Phase:

"Port Control, this is [Vessel Name], departing [Port Name], over."

"Monitoring Channel [X] for navigational updates and traffic advisories, over."

"Resume regular transit procedures, maintaining course and speed, over."

"Coordinating with nearby vessels for safe passage, over."

Post-Transit Phase:

"Port Control, this is [Vessel Name], confirming departure from [Port Name], over."

"Submitting voyage report to [Authority Name], over."

"Reviewing communication logs and recordings for compliance, over."

"Preparing for next voyage, standby for communication planning, over."

# data[].attributes.body
Mayday Call:

"Mayday, Mayday, Mayday. This is [Vessel Name], [Vessel Name], [Vessel Name]."

"Mayday, Mayday, Mayday. This is [Vessel Name] in position [Latitude and Longitude] or [Position Description]."

Nature of Distress:

"We are [Nature of Distress: sinking/afire/stranded/capsized/etc.]."

"Request immediate assistance, over."

Vessel Description:

"We are [Vessel Type and Size] with [Number of Crew] onboard."

"Our vessel is painted [Color] and has [Distinctive Features], over."

Location:

"Our position is [Latitude and Longitude] or [Position Description]."

"We are approximately [Distance] from [Nearest Landmark or Navigational Aid]."

Assistance Required:

"Require immediate assistance due to imminent danger to life and vessel."

"Please notify relevant authorities and nearby vessels of our distress situation, over."

Actions Taken:

"We have deployed [Lifeboats/Life Rafts] and are preparing to abandon ship."

"Have activated distress signaling devices including EPIRB [Emergency Position Indicating Radio Beacon] and/or SART [Search and Rescue Transponder]."

Communication Information:

"Our primary distress channel is [Channel Frequency]."

"Monitoring Channel 16 for response and coordination, over."

Repeat Distress Call:

"Repeat: Mayday, Mayday, Mayday. This is [Vessel Name], [Vessel Name], [Vessel Name]."

"Repeat: Mayday, Mayday, Mayday. This is [Vessel Name] in position [Latitude and Longitude] or [Position Description]."

Continuous Monitoring:

"Standby on this frequency for further updates, over."

"Any vessels or stations receiving this distress call, please acknowledge, over."

# data[].attributes.body
Pan-Pan Call:

"Pan-Pan, Pan-Pan, Pan-Pan. This is [Vessel Name], [Vessel Name], [Vessel Name]."

"Pan-Pan, Pan-Pan, Pan-Pan. This is [Vessel Name] calling on Channel [Frequency]."

Nature of Urgency:

"We have a [Nature of Urgency: mechanical failure/navigation problem/medical emergency/etc.]."

"Requesting urgent assistance or advice, over."

Vessel Description:

"We are [Vessel Type and Size] with [Number of Persons] onboard."

"Our vessel is painted [Color] and has [Distinctive Features], over."

Location:

"Our position is [Latitude and Longitude] or [Position Description]."

"We are approximately [Distance] from [Nearest Landmark or Navigational Aid]."

Assistance Required:

"Require urgent assistance to resolve [Specific Issue]."

"Please advise on nearest port or safe anchorage, over."

Actions Taken:

"We are taking measures to mitigate the situation, but assistance is needed."

"Have attempted troubleshooting but unable to resolve the issue, over."

Communication Information:

"Our primary urgency channel is [Channel Frequency]."

"Monitoring Channel 16 for response and coordination, over."

Repeat Pan-Pan Call:

"Repeat: Pan-Pan, Pan-Pan, Pan-Pan. This is [Vessel Name], [Vessel Name], [Vessel Name]."

"Repeat: Pan-Pan, Pan-Pan, Pan-Pan. This is [Vessel Name] calling on Channel [Frequency]."

# data[].attributes.body
Respuesta

Is a critical process that involves educating employees about risks and hazards, ensuring they understand safety operations, procedures, and controls, and building a culture of safety. It aims to reduce accidents, instill safety as a top priority, and relay employees' rights and responsibilities regarding safety.

Effective safety communication strategies include targeted messaging, safety moments, toolbox talks, and utilizing technology to disseminate safety messages efficiently. Organizations must prioritize safety communication to protect workers, ensure understanding of safety measures, and establish a culture of safety to reduce accidents and injuries.

The FDA issues Medical Device Safety Communications to provide regulatory approaches and clinical recommendations for patient management.

Effective safety conversations play a crucial role in improving workplace safety and health by promoting good communication

skills, real listening, clear speech, and well-run meetings.These conversations help in engaging workers, encouraging participation in safety programs, and preventing injuries by addressing safety concerns effectively

# data[].attributes.attachment_link.title
Safety - Communication Prevents Accidents

# data[].attributes.body
Pilotage, also known as piloting, is the process of navigating ships or aircraft using fixed points of reference on the sea or in the air to determine their position. This navigation technique involves using nautical or aeronautical charts, visual observations, radar, depth sounders, and altimeters to obtain fixes of the vessel or aircraft's position.

Requesting Pilotage:

"Port Control, this is [Vessel Name], requesting pilotage assistance for entry into [Port Name]."

"Pilot Station, Pilot Station, Pilot Station. This is [Vessel Name], requesting pilot boarding."

Confirmation and Instructions:

"Pilot Station, this is [Vessel Name], confirming pilot boarding arrangements, over."

"Pilot onboard, requesting instructions for maneuvering into [Port Name]."

Navigational Assistance:

"Pilot, please advise on recommended course adjustments to navigate safely through the channel."

"Requesting guidance on speed and maneuvering for entry into the port, over."

Communication with Pilot Boat:

"Pilot Boat, Pilot Boat, this is [Vessel Name], standby for pilot transfer."

"Pilot Boat, please confirm ETA for pilot boarding, over."

Safety Precautions:

"All crew, prepare for pilot boarding and assist as necessary."

"Maintain a clear deck and proper lookout for safe pilot transfer."

Handover Procedures:

"Pilot onboard, assuming navigational control. Captain and pilot exchange relevant information."

"Confirming transfer of navigational authority to the pilot, over."

Navigational Guidance:

"Pilot, provide regular updates on navigational hazards and required course adjustments."

"Requesting pilot assistance for berthing maneuvers, over."

Close Communication:

"Maintaining constant communication with the pilot for coordination and decision-making."

"Pilot, please advise on clearance under bridges and alongside berths, over."

Pilot Disembarkation:

"Pilot onboard, request permission to disembark upon safe arrival at berth."

"Confirming pilot disembarkation and resumption of vessel's navigational control."

Expressing Gratitude:

"Thank you, Pilot, for your assistance in safely navigating through [Port Name]."

"Acknowledging the valuable support of the pilot during our transit, over."

# data[].attributes.body
It seems like you're referring to "specials" in a maritime context. In marine terminology, "specials" could refer to various specialized operations, equipment, or situations. Here are some interpretations:

Special Operations:

This could encompass unique or non-standard maritime activities such as salvage operations, underwater inspections, or scientific research missions. Communication during these operations would involve coordination between the vessel's crew, specialized personnel, and relevant authorities.

Special Equipment:

"Specials" might refer to specialized equipment or machinery onboard a vessel, such as firefighting apparatus, rescue boats, or pollution control devices. Effective communication is crucial for deploying and operating these specialized tools safely and efficiently.

Special Situations:

This could denote unusual or emergency situations at sea, such as medical emergencies, onboard fires, or encounters with hazardous weather conditions. Communication during special situations requires clear and prompt exchanges of information to ensure the safety and security of the vessel and its crew.

Special Cargo:

"Specials" might also refer to specialized or hazardous cargo being transported by the vessel, such as chemicals, explosives, or oversized equipment. Communication regarding the handling, stowage, and transportation of special cargo is essential to prevent accidents and ensure regulatory compliance.

In any case, effective communication plays a critical role in managing specials in the maritime domain, ensuring that all involved parties are well-informed, coordinated, and able to respond appropriately to the unique challenges or requirements presented by these situations.

# data[].attributes.headline
Vessel Traffic Service (VTS) Standard -Phrases

# data[].attributes.subject
Vessel Traffic Service (VTS) Standard -Phrases

# data[].attributes.body
(VTS) is a maritime service that provides active monitoring and navigational assistance to vessels in a particular area, typically in and around ports or other areas with high maritime traffic. VTS aims to enhance navigational safety, prevent collisions, and ensure efficient traffic flow.

Pre-Entry Phase:

Vessels intending to enter the VTS area notify the VTS center of their arrival and provide relevant information, such as vessel particulars, ETA, and intended route.

VTS prepares to receive the vessel, allocates resources, and updates traffic management plans accordingly.

Approach Phase:

Vessels nearing the VTS area receive initial navigational information, including traffic conditions, weather updates, and any relevant navigational warnings.

VTS monitors vessel movements as they approach the VTS area and provides guidance on entry procedures and traffic separation schemes.

Entry Phase:

Vessels enter the VTS area and establish communication with the VTS center.

VTS assigns specific reporting points, tracks vessel movements using surveillance systems, and provides navigational assistance as needed.

Transit Phase:

Vessels navigate through the VTS area under the supervision of VTS, adhering to traffic management instructions and maintaining communication with the VTS center.

VTS monitors vessel movements, manages traffic flow, and coordinates passing arrangements to ensure safe and efficient transit.

Exit Phase:

Vessels exiting the VTS area receive guidance on departure procedures and traffic separation schemes.

VTS continues to monitor vessel movements as they exit the VTS area, providing assistance and updates as necessary.

Post-Exit Phase:

Vessels leaving the VTS area report their departure to the VTS center and provide feedback on the quality of service received.

VTS updates traffic management plans based on vessel departures and prepares for the arrival of incoming vessels.

# data[].attributes.attachment_link.title
VTS STANDARD PHRASES | SMCP | MARITIME ENGLISH #18 | UASUPPLY

# data[].attributes.headline
Description of radio communications system

# data[].attributes.subject
Description of radio communications system

# data[].attributes.body
The radio communications system comprises various components and technologies that enable the transmission of data and voice information using radio waves across different frequencies. It involves devices employing either wireless or wired communication methods, such as portable radios, mobile radios, base/fixed station radios, and repeaters, along with accessories like speaker microphones and encryption enhancements to meet user needs.

In a radio communications system, the technologies can be categorized as "wired" or "wireless," where wired systems operate over limited areas using physical wires, while wireless systems utilize radio frequencies to connect users over larger geographical areas. Radio frequency (RF) communication systems offer advantages like long-distance communication, the ability to transmit through obstacles, and scalability to accommodate numerous users. The range of a signal in a communication system is defined as the distance between the transmitter and receiver where the signal amplitude is higher than the background noise level.

Radio frequencies used in wireless systems typically range from 0.05 MHz to 900 MHz, with public safety communications radios transmitting between 30 MHz and 900 MHz. Cell phones, global positioning receivers, and other systems transmitting data from remote locations operate in the microwave band between 1 GHz and 20 GHz. Conventional radio systems assign discrete radio channels to user groups, enabling communication on a first-come, first-serve basis within a specific coverage area. These systems facilitate communication between users equipped with radios from different manufacturers, provided they are programmed to the same frequency.

Overall, the radio communications system plays a crucial role in facilitating voice and data transmission over radio waves, offering a versatile and efficient means of communication across various sectors such as public safety, aviation, maritime, amateur radio, and more.

# data[].attributes.body
The VHF procedures for marine radio use involve essential steps to ensure effective communication and safety while navigating waters. Here are key points from the provided sources:

1. Turning on the VHF Radio: Start by turning on the VHF unit and adjusting the squelch to eliminate static noise

2. Selecting Channels: Tune to channel 16, which is monitored by the U.S. Coast Guard, for emergency calls and important communications

3. Radio Checks: Perform radio checks on open channels like 68, 69, 71, 72, and 78A to ensure your unit is functioning properly without using channel 16

4. Making Calls: When hailing other boats, start on channel 16, then switch to a working channel like 68, 69, 71, or 72 for routine communication

5. Emergency Procedures: In case of emergencies, tune the radio to channel 16 at full power and use "Mayday" for life-threatening situations or "pan-pan" for urgent but not life-threatening issues

6. VHF Radio Channels: Channel 16 is designated for distress, safety, and calling purposes, while other channels like 9, 68, 69, 71, and 72 are used for routine communication

7. Regulations and Compliance: Familiarize yourself with FCC regulations, including proper channel usage, distress signals, and watchkeeping, to ensure compliance and effective communication

8. Resources for Guidance: Utilize resources like the Coast Guard Navigation Center for further guidance on VHF radio use, regulations, and best practices

# data[].attributes.attachment_link.title
Boating How To - Marine VHF Radio MMSI and DSC

# data[].attributes.body
The sources provided offer valuable insights into applied terminology within the maritime industry. Here are key points from the sources:

1. Maritime English: It is crucial for effective communication at sea, ensuring safety, efficiency, and clarity in daily tasks. Standard Maritime Communication Phrases (SMCP) serve as the lingua franca, providing specific terms for ship-to-ship, ship-to-shore, and internal communications. Examples include terms for positions on a boat like bow, stern, midship, port, starboard, decks, and bridge. Message markers like 'INTENTION,' 'REQUEST,' 'QUESTION,' and 'ANSWER' help streamline communication and responses

2. Maritime Dictionary: A resource that compiles maritime terminology, offering definitions and explanations for various nautical terms used in the industry. It serves as a valuable tool for seafarers and maritime professionals to understand and communicate effectively

3. Maritime Terms, Abbreviations, and Acronyms: This comprehensive list provides a wide range of terms, abbreviations, and acronyms commonly used in the maritime industry. It is a reference guide for understanding and decoding the specialized language used in maritime communications and documentation

4. IMO Standard Marine Communication Phrases: The IMO has established Standard Marine Communication Phrases to ensure standardized and effective communication in the maritime sector. These phrases are essential for clear and concise communication, enhancing safety and operational efficiency at sea

These sources collectively emphasize the importance of precise and standardized maritime terminology, highlighting its role in promoting safety, efficiency, and effective communication within the maritime industry.

# data[].attributes.body
in the maritime context refers to a set of standardized terms and phrases used for clear and consistent communication among maritime professionals. These standardized terms help ensure effective communication, minimize misunderstandings, and enhance safety at sea. Here's a list of commonly standardized vocabulary used in maritime communication:

Port and Starboard:

Port refers to the left side of the vessel when facing forward, while starboard refers to the right side.

Bow and Stern:

Bow refers to the front of the vessel, while stern refers to the rear.

Abeam:

Abeam refers to a direction perpendicular to the vessel's centerline, at a right angle.

Ahead and Astern:

Ahead refers to the direction of travel or motion forward, while astern refers to the direction of travel or motion backward.

Course and Heading:

Course refers to the intended direction of travel, usually expressed in degrees from true north.

Heading refers to the direction the vessel's bow is pointing, usually expressed in degrees from the vessel's centerline.

Windward and Leeward:

Windward refers to the direction from which the wind is blowing.

Leeward refers to the direction opposite to the wind, sheltered from the wind.

Draft:

Draft refers to the depth of the vessel's hull below the waterline, indicating how much of the vessel is submerged.

Beam:

Beam refers to the width of the vessel at its widest point.

Channel and Fairway:

Channel refers to a marked navigable route within a harbor or waterway.

Fairway refers to the main navigable route within a harbor or waterway, often marked by buoys or beacons.

Buoyage:

Buoyage refers to the system of navigational aids, including buoys and beacons, used to mark navigable channels and hazards.

Navigation Lights:

Navigation lights are lights mounted on vessels to indicate their status, position, and direction of travel at night or in reduced visibility conditions.

Sound Signals:

Sound signals are audible signals used by vessels to communicate their intentions or warn of potential dangers, such as fog horns and whistle blasts.

Radio Callsigns:

Radio callsigns are unique identifiers assigned to vessels for communication purposes, typically consisting of letters and numbers.

International Maritime Organization (IMO) Phonetic Alphabet:

The IMO Phonetic Alphabet is a standardized set of words used to spell out letters in communication to avoid misunderstanding, e.g., "Alpha," "Bravo," "Charlie," etc.

International Code of Signals (ICS):

The ICS is a standardized system of signals used for communication between vessels at sea, covering a wide range of messages and situations.

# data[].attributes.body
The On-Board Standard Marine Communication Phrases (SMCP) play a crucial role in enhancing safety, efficiency, and effective communication within the maritime industry. These phrases, developed by the International Maritime Organization (IMO), serve to standardize language used in ship-to-ship, ship-to-shore, and on-board communications. The SMCP aims to improve navigation safety, facilitate multilingual crew interactions, and assist maritime training institutions in meeting safety objectives. By providing a common language for maritime professionals, the SMCP ensures clear and precise communication, particularly in situations where precise meanings and translations are essential. Additionally, the SMCP aligns with international conventions like the STCW and SOLAS, covering relevant communication safety aspects. Overall, the On-Board Standard Marine Communication Phrases are a vital tool for promoting safe and effective communication practices at sea, contributing to the overall safety and operational efficiency of maritime operations.