# data[].attributes.body
if you open a new bottle of soda you can see gas come out

# data[].attributes.body
A solid can be turned into a gas by mixing an ice cube with boiling hot water the temperature  is at 100'c  and it can used by energy. and it is also mixing with molecules.

# data[].attributes.body
The solid that is ice turn into a liquid when the temperature hits 100'c . because when the energy goes on the molecules move faster and cause them to move and turns them into liquid. The liquid is water and the molecules kinda move fast it take it awhile to turn into gas when the energy goes on it takes it a while for the molecules to move fast when .it fast it makes gas and gas molecules move really fast

# data[].attributes.body
A solid turns into a liquid by using heat witch the heat has to be at 0 degrees in order for the solid to melt . The solid turns into water with the heat, it melts because the molecules move faster with the heat and they seperate. You can turn the water into gas with more heat and then you evaporate the water with heat.

# data[].attributes.body
A solid can be turned into a liq

# data[].attributes.body
A solids stay together but they still vibrate. Solids only melt in 100 Celsius. A liquid is a bonds that move around but they bump in to each other but they don´t get far away from each other.  And if water gets to hot it will tun to a gas.And gasses move around like crazy but they do not bump in to each other .

# data[].attributes.body
A solid turns into a liquid by using heat which has to be at 0 degrees to melt for the solid to turn into it will than start to reach it's boiling point of 100 degrees. When the liquid is heating, the molecules start to bounce around more and are when the liquid hits it's melting point... until they all melt.

# data[].attributes.body
a solid is a liquid. that turns into a gas when it is in 100oc.

# data[].attributes.headline
water turns into gas when it gets to (100 degrees) 

# data[].attributes.subject
water turns into gas when it gets to (100 degrees) 

# data[].attributes.body
A solids turns to liquid when t

# data[].attributes.body
A liquid turns into a gas when the ice melts. When it is melts the heat makes it turn into a gas because the molecules move faster and faster.When the liquid and the heat bond it makes it turn into a gas.As the ice is melting the temperature stayed at zero and when it is done melting and heat is added the temperature then starts to go up.A solid looks like a circle with two other circles attached to it.

# data[].attributes.body
A solid goes to a liquid when it hits the melting point. Also it looks like little bubbles when they it starts to boil and also the molecules look all close together and can not come apart. A liquid turns in a gas when the temperature hits 100 degrees. The molecules look all separate and don't want to be together.

# data[].attributes.body
A solid

# data[].attributes.body
a solid turns into a liquid by using heat but the heat has to be 0 degress

# data[].attributes.body
A solid turns into a liquid by using heat which has to be at 0 degrees, for it to melt. Now you can also turn a liquid into a gas when the temperature hits 100 degrees and becomes steam.

# data[].attributes.body
A solid goes to a liquid when the solid starts to melt when it reaches its melting point (100 C). It then turns into a liquid. The it evaporates and turns into a gas and becomes steam.

# data[].attributes.body
the solid turn into a liquid by melting the solid

# data[].attributes.body
Well a solid is created with energy. A solid is a stable structure with no liquid with a little bit of movement between the molecules.  When it gets more energy with heat it turns into liquid. Liquid is a fluid that can fit into anything. With molecules that move faster than the molecules of a solid. Then when it gets more energy it turns into a gas. A gas is like smoke that is made out of water and heat the gas can go everywhere because the gas has molecules that move every where.

# data[].attributes.body
The solid goes to a liquid

# data[].attributes.body
The molecules in solids move a little bit and they move very slowly while still being connected to other molecules at the bottom of a vessel. When the molecules gain energy or heat they turn into liquid molecules. The molecules in liquids move faster than the molecules in solids but still not as fast as the molecules in gases. The molecules can now slide past one another and move to other parts of the vessel. When the molecules gain even more energy or heat they turn into gas molecules. The molecules in gases move the fastest and move everywhere like crazy.

# data[].attributes.body
Nathan Cuevas

# data[].attributes.body
Ismael Turcios

# data[].attributes.body
first a solid melts and turn to liquid to 0 then when its boiling it goes to 100 and molecules start moving like crazy

# data[].attributes.body
A solid goes to a liquid when the solid starts to melt when it reaches it's melting peak. Since the solid is melting the energy created makes the molecules slide past each other and start to break the bonds turning it into a liquid. When the solid turns into a liquid it will be at 0 degrees, it will then start to reach it's boiling point of 100 degrees. When the liquid is heating, the energy becomes stronger which then causes the molecules start to bounce around more and are still broken from the bonds. When the liquid hits it's melting point it starts to turn into a gas. When the gas is made the amount of energy from the gas makes the molecules move away and fly all over the place.

# data[].attributes.body
When you put a solid in a pan and the heat is off the molecules stay together. When the pan has heat the solid starts to turn into a liquid and the molecules are moving but very slow. Now the liquid has turned into a gas and the molecules are all over the place. The temperature starts at -10 and it goes up to 0 and then it goes up 100 degrees.The states of matter are solid,liquid, and gas. There molecules are staying still, moving slowy, and going very fast.

# data[].attributes.body
When you put ice in a pan it starts melting  and there are 3 stages ice,water,gas.

# data[].attributes.body
A solids turns into a liquids when it heats .The mol

# data[].attributes.body
A solid turns into a liquid wen gets with 0 degrees c. liquid needs 100 degrees c to be on its boiling point.

# data[].attributes.body
A solid's molecules will be very still but move a little bit. A solid turns into a liquid when heat is added and reaches its' melting point. The solid is now a liquid and its' molecules move around. A liquid's molecules would be moving ,but not too much. A liquid turns into gas when heat is added.The molecules start moving around everywhere and are very spread out. The energy builds up and and causes all the movement in the molecules. That's how the states of matter changes.

# data[].attributes.body
There are different stages in molecules it starts off with the solid. Which the molecules are in a group and are moving side to side next to each other. The liquid is next stage which the molecules are moving and passing each other. They are moving fast but still not spread around every where. Then finally gas which the molecules are moving around fast. They are all spread around the vessel, and bouncing up and down from the vessel.

# data[].attributes.body
A solid stays together, it's like an ice cube that was a liquid, the molecules barley move at all. A liquid stays together but doesn't move a lot, it only moves passed each other, the molecules don't move a lot. A gas just moves all around the molecules move all around. When a solid melts, at about 0 degrees it turns into a liquid. When a liquid boils at 100 degrees it turns into a gas. Energy makes heat like when you run and you get hot.

# data[].attributes.body
Energy influences temperature, the way it does is the more or less energy there is means the way the temperature will go. A solid is matter made up of molecules and they can reach a melting point to turn into a liquid. A liquid is made of the same matter of the solid that you can melt and then when you melt it it can reach a boiling point and then the boiling point can get to a gas after. For example Ice: it can be a solid then turn to a liquid, water, and then boil, then to a gas. When a solid is formed it has molecules that stay so close together and vibrate a little to hold their form of matter. With a liquid they don't stay far from each other but also not far away, they are able to slip past each other and go anywhere the liquid is in. Then with a gas the molecules are the same as the water and ice so the molecules go faster and with more energy it has the more faster the molecules will go.

# data[].attributes.body
A solid turns into a liquid when the atoms start loosing their bond. The bond is made up of the amount of energy it is consistent of. The amount of energy is consistent of the temperature. Dependent on the temperature it will determine the state of matter for example if the weather is cold the atoms are going to vibrate at a very slow speed crating a certain shape which we would know as ice. As the atoms start building up energy consisted of the heat which would determine the speed of the vibration it would show what state it was in, liquid would vibrate at a speed separating the bond of the atoms which would be shown by the consistency because it would take the form of almost any shape. Same with gas it will take the form of mostly any shape though the atoms are much further seperted.

# data[].attributes.body
T

# data[].attributes.body
A solid has molecules that are rigid and have certain volume and a certain shape.  A solid turns into a liquid when the temperature hits 0 degrees celsius which is the melting point. Liquid has molecules that are not rigid and are bumping into each other and they do not have a certain shape but does have a certain volume. A liquid turns into a gas when reaches 100 degrees celsius which it the boiling point. Gas has molecules that are not rigid and are moving everywhere and they do not have a certain shape nor volume. The energy helps the molecules melt or boil because when there is a lot of movement it gets hotter.

# data[].attributes.body
A solid goes to a liquid when it hits its melting point. A good example is ice. Ice has a melting point of 0 degrees Celsius ( or 32 degrees Fahrenheit). Once it reaches this melting point it starts to melt. The molecules start getting energized and tart vibrating. The vibrating then breaks the bonds of the atoms. It will stay 0 degrees Celsius until all the ice is gone, and only water is left. The atoms have now broken away from each other and are moving more swiftly and aren't clumped. The water will now rise in temperature, leading to the boiling point. Once it hits the boiling point it will turn into steam, or water vapor. This means the atoms have broken away from each other even more, and are vibrating more. They are now not near each other and are bouncing around. The temperature will stay constant, until no water is left. This leaves just steam. So the atoms have now broken away from one another, and are very separate.

# data[].attributes.body
A solid changes from solid to gas when the temperature starts increasing. From a solid it starts melting which soon creates a liquid which then turns into gas. When the solid starts heating up the molecules gain energy and then gain more which gets from liquid to gas.

# data[].attributes.body
When the temperature gets warmer, a solid turns into a liquid. Once it gets warmer, the liquid turns into water vapor. The molecules in a solid don't move a lot. When it turns into a liquid, the molecules start to move more. And when the liquid turns to water vapor, the molecules move more rapidly.