# data[].attributes.body
so if you know that 7x7=49 and you would do length x with.

# data[].attributes.body
I now that

# data[].attributes.body
What i did was i know 7x7=49

# data[].attributes.body
7 x 7 = 49 so you would add 7 four times

# data[].attributes.body
first you would do what times what equals 49 (7) then do( L PLUS L)( W plus W)

# data[].attributes.body
I know that 6×7= 42 then you add one more seventh which gives you 49 so that means 7×7=49

# data[].attributes.body
Reflex helped me with this so if a square has an area of 49 inches you could do length x width and I know that 7x7=49 so what i did was when i was making my model I did was length x width so 7x7 and got 49! THANKS A LOT REFLEX!!!!!!!

# data[].attributes.body
you would f

# data[].attributes.body
Thanks to reflex math, I know that 7X7=49.That is the area.7+7+7+7=28
Perimeter is: 28
THANK YOU REFLEX!!!

# data[].attributes.body
what you do is 7x7=49 so your answer is 7 on each side and the perimeter is 28 because 7x4= 28!😄

# data[].attributes.body
To find the perimeter of the square you need to know a side of the square then, you do 7x4 which is 28.

# data[].attributes.body
First you would need to make a square (with equal side) then find out what times what would give you 49 and it would be 7 x 7 and remember when you had to make a square with equal sides so the width and length would be the same so you ad up the 4 sevens and your perimeter would be 28. :)

# data[].attributes.body
First, you have to know one side of the rectangle which is 7. Then,  figure out the other side of the rectangle which is also 7 because 7x7 = 49 and 49 is the area. Finally, add up all the sides and you should end up with a perimeter of 28.

# data[].attributes.body
first you would need to know one side of the shape (7) and then do 7x4 to get the area, which is 28

# data[].attributes.body
the perimeter is 28 because 7x7=49 so both of the side would be 7

# data[].attributes.body
the answer is 28. how i found this out is that i divided 49 with 7 because i know that 7 * 7=49 so 7 would go on each side.

# data[].attributes.body
You would say what times what equals  49 and it would be 7x7 =49 and the perimeter is 28

# data[].attributes.body
to find the perimeter first you need to find out what the width times length would give you the area? 7 times 7. so now you know 7 times 7 equals 49 add it together 7+7+7+7=28. the answer is 28.

# data[].attributes.body
7x7=49 that is the area but the perimeter is 7x4=28

# data[].attributes.body
to find the perimeter of the square one side

# data[].attributes.body
49 is the perrimiter and the area is 4.

# data[].attributes.body
49 is the perimeter

# data[].attributes.body
you can find the perimeter by adding the length and the area together which should always be the same number. so here is how you find the perimeter.

EX:

# data[].attributes.body
i will draw a rectangle then i will divid and ask my self  what times some thing eqaul 49 so i thought about it and said 7x7 and i got 49 and the perimeter will be 28.

# data[].attributes.headline
you divide 49 into 4 groups and  you wold get 7 and add it up 4 times to get 28                    

# data[].attributes.subject
you divide 49 into 4 groups and  you wold get 7 and add it up 4 times to get 28                    

# data[].attributes.body
EVAN

# data[].attributes.body
first you need to find the width and the length then you have to multiply 7 *7= 49 and all the sides will be 7 and then the perimeter will be 28

# data[].attributes.body
first, I 7+7=49 so I put 7 on each then I did 7+7=14, But there is 4 7's so I have to do 7+7=14 again. lastly, I added the 2 sums together which would look like this, 14+14=28 so the answer is 28.

# data[].attributes.body
you split it in half, because that is the important part of area and perimeter.

# data[].attributes.body
what i did was i knew that 7x7=49, but then i also did 7 four times and got 28, so 28 is my ANSWER!

# data[].attributes.body
you would split 49 into four numbers. i know that 7 x 7 = 49 so then all of the sides would be 7. add all of those 7 and the perimeter would be 28.

# data[].attributes.body
First you should divide 49 by 2 and get 7 and 7 that would mean it is a square 7 + 7 + 7 + 7 = 28 28 should be the answer. You could check with multiplication 7 x 7 = 49.

# data[].attributes.body
How I will solve these problem so I know that 7 x 7 = 49 so divide 7 and 49 to get 7 then I know it is a square so all the sides are 7 so I add all the sides and I will get 28 as my perimeter.

# data[].attributes.body
The way you would find the perimeter is first,

# data[].attributes.body
first you need to  get the length and the width which are the same  and add all the sides up  to get your asnwer

since 7 x 7 =49 the width and the length is the same so all the sides is 7 and if you add them all up the perimeter is 28

# data[].attributes.body
You would find the perimeter by finding the length and and perimeter which is 7 because 7x7=49. so you would add up seven four times and get 28 as your perimeter.

# data[].attributes.body
to find the perimiter you add the two sides together

# data[].attributes.body
to get the perimeter you have to add up all of the sides to see what you will get as your answer,and since it is a spuare it would be 7 7 times 7(length would be 12)with would be 10

# data[].attributes.body
To find the perimeter  you would first have to find the length and the width of the square. Then you would have to add all the sides up.

7x7= 49 so the perimeter is  28

# data[].attributes.body
To find the  perimeter you would need to do have the first length eather length or with and then do

# data[].attributes.body
To find the perimeter of the square you would have to think of a factor od 49 and one would be 7. so you would put 7 on all four sides. 7x4=28 so the perimeter would be 28 inches

# data[].attributes.body
how to find the perimeter of the square is that you have a equation to know your sides so I put 7x7=49 and so all your sides would have to be 7  and so the perimeter would be 28 if u add all the sides up.

# data[].attributes.body
The way you would find the perimeter is  you would first find the the length and the width of the square  then all you would do next  is you would then add all the sides together to get your perimeter.

So 7x7=49 so you would put 7 on all the sides of the square  and then add them up and then you would get the perimeter and that would be 28 square units