# data[].attributes.body
When adding and subtracting binomials and polynomials you need to make sure they are in order by degree and then you distribute, combine like terms, and you add or subtract whatever you need to and find your sum.

# data[].attributes.body
You multiply a binomial and a polynomial by distributing. Then, when you finished distributing, you add or subtract each terms. When you're done adding or subtracting each terms, then you combine like terms.

# data[].attributes.body
You multiply binomial and polynomials by first distributing the first binomial or polynomial, then you would combine like terms. Afterwards make sure that it is in standard form.

# data[].attributes.body
To add a polynomial you have to make sure to put it in standard form then add the like terms. To subtract polynomials you change the sign to addition and all the signs of the terms after it.  After that you do the same as adding them.

# data[].attributes.body
To multiply binomials you will first have to use the binomial to multiply it with the trinomial then you have to break down the binomial so that way you only have the terms and then you multiply the binomial terms with the trinomial terms then you add them by combining them with their same degree and that's it.

# data[].attributes.body
To add polynomials, you write the equation in standard form and then combine like terms. To subtract polynomials, you write the equation in standard form, distribute the negative in the parenthesis to the right side of the negative which will change the signs in front of the numbers and then you combine like terms.

# data[].attributes.body
To Add and Subtract Polynomials you first write the equation in standard form. Then you combine like terms.

# data[].attributes.body
to add polynomials, you must first put it in standard form and then combine like terms

# data[].attributes.body
In order to multiply a binomial and a polynomial first you distribute then add what you have . Then you put it in standard form .

# data[].attributes.body
i learned to add and multiply polynomials by first adding like terms, and then put it in like terms and the finish up the problem.
for subtracting polynomials you would first multiply the left side by a negative 1 and then solve like adding polynomials

# data[].attributes.body
Multiplying binomials- first you distribute the terms in the binomial to each of the terms in the polynomial and then put it into standard form

# data[].attributes.body
I learned how to subtract and add polynomials. In order to subtract polynomials you have to distribute the negative into the parenthesis and then combine like terms to get it into standard form. You have to do the same when adding polynomials except you don't have to distribute anything, just have to combine like terms.

# data[].attributes.body
To add a polynomial, first you need to put in standard form then combine like terms. To subtract you you distribute the negative, put in standard form, and then you combine like terms.

# data[].attributes.body
To multiply binomials is when you use the distributive property method then you will distribute the terms and then you will simplify it

# data[].attributes.body
To multiply a binomial and a polynomial, you must distribute the binomial to the polynomial and then combine the like terms. Once you are done, order your terms into standard form.

# data[].attributes.body
To multiply binomial and polynomials by first expanding and simplify second apply distributive property third then simplify

# data[].attributes.body
To multiply a polynomial and binomial first you need to use the distributive property then simplify by combining like terms. Lastly, you put it in standard form.

# data[].attributes.body
To multiply a binomial and a polynomial you must first distribute the two properties then after that add together what you got from distributing.

# data[].attributes.body
you must first apply the distributive property then distribute each term then you simplify it and put it in standard form

# data[].attributes.body
To multiply binomials and polynomials you have to use the distributive property so you can multiply the binomial terms to the polynomial.

# data[].attributes.body
Multiplying binomials by polynomials you distribute each of the terms in the binomial to each of the polynomial terms.

# data[].attributes.body
when multiplying polynomials you are supposed to distribute the different and alike terms together. Then put into standard form.

# data[].attributes.body
To add polynomials you make it first into standard form and combine like terms. To subtract polynomials you distribute the negative and put it into standard form and combine like terms.

# data[].attributes.body
To add and subtract polynomials you get the terms out of the parenthesis then you combine like terms.

# data[].attributes.body
To add polynomials, you must put them in order and combine like terms.

To subtract them, you must convert the second group of polynomials to the opposite sign and combine like terms.

# data[].attributes.body
Too add a binomial or polynomial, all you do is combine the like terms.

# data[].attributes.body
To add and subtract you just add like terms

# data[].attributes.body
To add polynomials you must combine all like terms.
To subtract polynomials you must  distribute the positive/ negative signs to the term.

# data[].attributes.body
To add/subtract binomials first you have to combine like terms. then you add/subtract like terms.

# data[].attributes.body
When adding and subtracting polynomials and binomials you combine like terms and solve using the highest degree.

# data[].attributes.body
To multiply a binomial, first you apply the foil method, then you combine like terms and to subtract you change the signs .

# data[].attributes.body
To add polynomials you combine like terms.

# data[].attributes.body
To add and subtract polynomials, you have to combine like terms.

# data[].attributes.body
When multiplying a binomial, you first apply the distributive property multiplying the terms of one group to the other. Then, you can simplify by combining like terms and ordering numbers/exponents in standard form

# data[].attributes.body
To multiply a binomials you can use FOIL & combining like term.
To add polynomials you combine like terms and to subtract polynomials you change the signs

# data[].attributes.body
To multiply a binomial and polynomial, you must first apply the distributive property. Multiply each term in the binomial with each term in the polynomial. Next you simplify like terms and put in standard form.

# data[].attributes.body
To multiply a binomials and polynomials first you have to distribute the terms and combine like terms together. Afterwards simiply the question and put it into standard form.

# data[].attributes.body
To multiply binomials and polynomials, you must use distribute the binomial and polynomial. After you distribute, you would simplify the binomial and polynomial.

# data[].attributes.headline
Multiplying a Binomial and Polynomial - Rocky Yang 

# data[].attributes.subject
Multiplying a Binomial and Polynomial - Rocky Yang 

# data[].attributes.body
Step 1- Distribute the signs.
Step 2- Combine like terms.
Step 3-  Put it into standard form.

# data[].attributes.body
To multiply binomial and polynomial by using distribute property. Then simplify the binomial and polynomial.

# data[].attributes.body
1. multiply each term in one polynomial by each term in the other polynomial.

2. add those answers together, and simplify if needed.

# data[].attributes.headline
How to Multiply a Binomial by a Polynomial - Jesus Prado

# data[].attributes.subject
How to Multiply a Binomial by a Polynomial - Jesus Prado

# data[].attributes.body
Step 1: Distribute
Step 2: Combine like terms
Step 3: Put in standard form

# data[].attributes.body
To multiply binomials and poly nominal first you need to distribute the signs and combine like terms, and then put it into standard form

# data[].attributes.body
When you add polynomials you combine like terms, then put into standard form. Then with subtracting you distribute the negative then combine like terms and then put into standard form.

# data[].attributes.body
To add binomials you have ti combine like terms

# data[].attributes.body
Math

# data[].attributes.body
You can multiply binomials by distributing the signs and then combine like terms.

# data[].attributes.body
You multiply a binomial and a polynomial by distributing the signs, then you simplify into standard form.

# data[].attributes.body
Adding polynomials you have to combine like terms. When you subtract you must distribute the negative sign to one side.

# data[].attributes.body
To add polynomials you would distribute the sign in front of the parenthesis and then combine like terms. To subtract you would distribute the negative sign to all of the numbers in the parenthesis.

# data[].attributes.body
To add polynomials you combine like terms . To subtract polynomials you have to move the negative sign and then combine like terms.

# data[].attributes.headline
Adding & Subtracting Polynomials- Analyse Sue Buckley

# data[].attributes.subject
Adding & Subtracting Polynomials- Analyse Sue Buckley

# data[].attributes.body
The first thing you do when adding polynomials is to combine all like terms (Ex.- 2x + 3x) (If it is subtracting, then you first have to distribute the -1)

# data[].attributes.body
You multiply a binomial by distributing it. Then after if you can simplify the answer using like terms.

# data[].attributes.body
1. expand and simplify
2. apply distributive property
3. apply the distributive property
4. simplify

# data[].attributes.body
1. You first distribute the multiplication sign into the second parenthesized set equation.
2. Then you  combine like terms
3. then you would simplify

# data[].attributes.body
You multiply binomial and a polynomial by disturbing both terms into polynomials. next you combine like terms. Finally you put it in standard form

# data[].attributes.body
Adding polynomials you have to combine like terms and subtracting you have to distribute the negative sign.

# data[].attributes.body
To add polynomials , you combine like terms. To subtract polynomials you have to first, distribute the negative sign and then combine like terms.

# data[].attributes.body
To add polynomials you combine like terms. To subtract polynomials, you distribute the negative sign to the numbers and combine like terms.

# data[].attributes.body
You add polynomials by grouping the like terms then adding the like terms together.

Sub. Polynomials you have to distribute the negative on one side then you group the like terms then add the like terms together.

# data[].attributes.body
You distribute both terms of the first part to the second part. Then add like terms. Simplify and write in standard form.

# data[].attributes.body
Multiply each term in a polynomial by grouping the like term then adding the like terms together.

# data[].attributes.body
Add - You add Polynomials by putting them in standard form, then combine all the like terms, and add them.
Subtract - You subtract Polynomials by putting them in standard form, distribute the negative (change the signs), combine the like terms, then you add them together.
-Lilly Iñiguez

# data[].attributes.body
For most questions, it asks you to put into standard form, which is in order.

# data[].attributes.body
You add polynomials by combining like terms and when you subtract you first distribute the negative then add like terms

# data[].attributes.headline
To multiply a binomial and a polynomial you have to distribute 

# data[].attributes.subject
To multiply a binomial and a polynomial you have to distribute 

# data[].attributes.body
Brian Matthews

# data[].attributes.body
Multiplying Binomials and a Polynomial -

# data[].attributes.body
First you have to distribute the terms from the polynomial or binomial then you simplify

# data[].attributes.body
1. put it in standard form
2. put like terms together
3. add the like terms

# data[].attributes.body
To multiply a binomial and a polynomial you first:
-group like terms
-simplify it
-put it in stamdard form

# data[].attributes.headline
Multiplying a binomial and a polynomial 

# data[].attributes.subject
Multiplying a binomial and a polynomial 

# data[].attributes.body
Multiply each term in a polynomial in each term of the other add those answers then simplify

# data[].attributes.body
1. Distribute the first set into the second set
2. Add the exponents and multiply the variables
3.add like terms
4. rewrite in standard form

# data[].attributes.body
To add and subtract polynomials you first make sure that it is in standard form, from here  yo group together like terms

# data[].attributes.headline
You add and subtract polynomials by adding or subtracting the common terms with the same variables and exponents. Then you have to write it in standard form by placing the variable with the highest degree first

# data[].attributes.subject
You add and subtract polynomials by adding or subtracting the common terms with the same variables and exponents. Then you have to write it in standard form by placing the variable with the highest degree first

# data[].attributes.body
Add like terms together and put leading coefficients in the front

# data[].attributes.headline
Multiplying Binomials and Polynomials - June 

# data[].attributes.subject
Multiplying Binomials and Polynomials - June 

# data[].attributes.body
1. Before you multiply binomial and polynomial you'll need to di

# data[].attributes.body
When you want to multiply the binomial and the polynomial you have to distribute the terms of the binomial to polynomial, for every single term. You then must simplify and combine any of the like terms that are involved after you distribute. Finally you need to put it into standard form.

# data[].attributes.body
In order to multiply a binomial and a polynomial, you need to:
1. Distribute both terms of the binomial into the polynomial
2. Combine like terms and simplify as much as possible
3. Arrange into standard form

# data[].attributes.headline
Multiplying Binomials and Polynomials - Adrian

# data[].attributes.subject
Multiplying Binomials and Polynomials - Adrian

# data[].attributes.body
To multiply polynomials

# data[].attributes.headline
Multiplying Binomials and Polynomials - Gabe V

# data[].attributes.subject
Multiplying Binomials and Polynomials - Gabe V

# data[].attributes.body
1. You distribute both terms of the binomial to the terms of the polynomial.
2. Simplify terms that have the exact power and/or variable.
3. Then you write it in standard form.

# data[].attributes.headline
Reflection Of adding and Subtracting-Nathanael

# data[].attributes.subject
Reflection Of adding and Subtracting-Nathanael

# data[].attributes.body
1. Rewrite without parenthesis
2. Combine like terms
3.simplify

# data[].attributes.body
To add and subtract polynomials you must put it standard from find like terms and simplify.

# data[].attributes.headline
Multiplying Binomials and Polynomials  - Katherine

# data[].attributes.subject
Multiplying Binomials and Polynomials  - Katherine

# data[].attributes.body
1. Multiply the like terms by each other and add the exponents together
2. Simplify

# data[].attributes.headline
Adding and Subtracting a Binomial and Polynomial - Shaylah Neely 

# data[].attributes.subject
Adding and Subtracting a Binomial and Polynomial - Shaylah Neely 

# data[].attributes.body
When you add and subtract binomials and polynomials, first you need to organize the terms from the highest exponent down to the least and then you combine like terms and organize them to standard form. If it is negative between the parenthesis then you must distribute the negative into the set of terms and then organize them to standard form and finally combine like terms

# data[].attributes.body
1. Put it in standard form
2. Group like terms
3. Add like terms
4. Simplify and put it standard form

# data[].attributes.headline
Adding and Subtracting Polynomials  - Heidi Bounlangsy

# data[].attributes.subject
Adding and Subtracting Polynomials  - Heidi Bounlangsy

# data[].attributes.body
1. Write in standard form
2. Find like terms
3. Add the terms together
4. Rewrite in standard form

# data[].attributes.body
1. Determine if you have to distribute a negative
2. Find common variables and exponents
3. Add the terms
4. Put the polynomial into standard form

# data[].attributes.body
To all I line up all like terms then combine. To subtract i change all the signs of the second equation then add.   Tyler

# data[].attributes.headline
How to add and Subtract a binomial and polynomial -Brooke

# data[].attributes.subject
How to add and Subtract a binomial and polynomial -Brooke

# data[].attributes.body
To add:
1. Group all the like terms
2. Add/Subtract all the terms that are alike
3. Then you get your answer

# data[].attributes.headline
Adding and Subtracting Polynomials- Amara

# data[].attributes.subject
Adding and Subtracting Polynomials- Amara

# data[].attributes.body
1. Combine like terms
2. Simplify

# data[].attributes.body
1. Combine like terms

# data[].attributes.headline
Multiplying Binomials and Polynomials - Kylie

# data[].attributes.subject
Multiplying Binomials and Polynomials - Kylie

# data[].attributes.body
1. Distribute both terms of the binomial to the terms of the polynomial.
2. Simplify any terms that have the same power and variable(s)
3. Rewrite in standard form

# data[].attributes.headline
Multiplying binomials and polynomials.    - Rachel

# data[].attributes.subject
Multiplying binomials and polynomials.    - Rachel

# data[].attributes.body
Steps:
1. Expand and simplify
2. Apply the distributive property
3. Simplify
4. Boom you're done

# data[].attributes.headline
Adding and Subtracting Binomial and Polynomial - Emily 

# data[].attributes.subject
Adding and Subtracting Binomial and Polynomial - Emily 

# data[].attributes.body
1. You need to identify or look for like terms and group them together.
2. After you group them together add or subtract them.
3. After you are done solving it put the answer in standard form.