# data[].attributes.body
Is the chart for the minerals also able to be used to identify the metals?

# data[].attributes.body
Put a drop of the acid onto the rock, and if it bubbles then is reacts. If you are not sure do it again. (don't listen to Mr. Boner he will scare you and try to confuse you.)

# data[].attributes.body
Mass:
Volume:
Density:
m/v

# data[].attributes.body
What color it is, and the type of lust that the mineral has.

# data[].attributes.body
-IT HAS TO CHANGE BY AT LEAST 10'c
-Dissolved solid will affect the plateau temperatures during fractional distillation. Therefore the plateau temperatures during fractional distillation cannot be used to identify the liquids
-don't go too slow or you will not finish.
-make sure that the liquid plateaus for longer.
-what the liquids temp is not moving then you have a plateau

# data[].attributes.body
the liquid in between the platues for fractional distillation pure, or good to test?

# data[].attributes.body
Make sure that you have everything written down.
-What it looks like
-All the test
-results
-reason

# data[].attributes.body
Identify the liquids that you separated, with density, fallibility, solubility of sugar, and odor.

# data[].attributes.body
Separate and identify the powders with MMP, Acid test, and solubility.

# data[].attributes.body
Find the one plastic in your sludge and then Put it threw the testing for plastics. MAKE SURE YOU DO THE WATER TEST FIRST.

# data[].attributes.body
You will need this when you are separating powders with liquid, or the sludge in the beginning.

# data[].attributes.body
-When you are done doing fractional distillation the substance left at the bottom of the test tube you shout boil in the evaporating dish so then it is the most concentrated, and you get the most powder, and make use of the rest of the substance.

# data[].attributes.body
it is used for measuring out a certain amount of liquid, or substance.

# data[].attributes.body
This is used for fining powders out out liquids, or using for melting point when something has a MMP over 100 degrees.

# data[].attributes.body
A Bunsen burner, named after Robert Bunsen, is a common piece of laboratory equipment that produces a single open gas flame, which is used for heating, sterilization, and combustion.

# data[].attributes.body
The little glass tube that you put the powder in fot MMP.

# data[].attributes.body
The tube that is attached to the cork on top of the big test tube (for fractional distillation) and travels down to the condensing tube. It can also be used for boiling point when you don't have a lot of liquid.

# data[].attributes.body
Will there be a way that we can preserve our separated powders for the next day?

# data[].attributes.body
Will we get a sheet of possible substances to identify the mystery objects with?

# data[].attributes.body
Put a little bit of acid on it then watch for bubbles and only bubbles as a reaction. Make sure that if you don't know just do it again and watch closely.

# data[].attributes.body
Take a little pinch of the powder to put in each liquid, and make sure you shake well.

# data[].attributes.body
Just make sure you wright down each step you do to find the type of plastic.

# data[].attributes.body
Just take a small smell to tell if its pure or not. You know its pure if it has no smell or knocks your socks off.

# data[].attributes.body
-ask for their help politely
- when asking them to verify a measurement say what do you think it is... instead of i think it is...

# data[].attributes.body
If you are not completely sure of your results or answers, then do density again with a different size piece and your partners opinion.

# data[].attributes.body
The Illicit Destruction of Africa's Forests and Contamination of the US Market. ... The report exposes a multitude of crimes committed in the forests of the Congo Basin, and the network of corrupt officials who enable illegalities and criminal activity.

Or in others words, its businesses trying to get rid of their toxic waste in a bunch of sludge so they don't have to pay as much. Kind of like hiding the dogs pills in peanut butter or a piece of meat.

# data[].attributes.body
-This will be the very very first thing that you do. Make sure that the liquid or the solids don't go over the filter paper. You also might be able to pick some things out with your hands or tweezers.
-then you will have to look threw and sort everything that you can (no the powders)

# data[].attributes.body
Fractional distillation is the separation of a mixture into its component parts, or fractions of different liquids.
Pinch and switch when the liquid is done plateauing, and make sure that the tube doesn't touch the liquid

# data[].attributes.body
First try separating them with a magnet if it looks like metal powder.
If that doesn't work put it into water or alcohol in hopes that one will dissolve and the other one wont, so then you can strain the other one out of it.

# data[].attributes.body
-The smaller the amount you use the faster something will boil, or melt, so LESS IS BETTER
-always wear glasses
-you and your partner must be working on two different things to save time

# data[].attributes.body
If your predictions for the powder all have melting or decomposition temp over 100 degrees use the evaporating dish instead of using the capillary tube first.
Only put a little bit of the powder in the Evap. dish

# data[].attributes.body
First you scoop and tap the powder into the capillary tube which looks like a little glass vile. You then attach it to the thermometer with a rubber band, and put it in a beaker full of water, up against the glass so then you can see the tube. Make sure that the tube isn't submerged in the water, and that the powder isn't wet. make sure to record the temp that the powder becomes clear and shrinks(turns into a liquid).
FOR THE EVAPORATING DISH- IF IT IS DECOMPOSED IT IS BLACK, AND MAKE SURE THAT YOU DO THE MMP FIRST UNLESS ALL OF YOUR PREDICTIONS HAVE AN MMP OVER 100

# data[].attributes.body
Flammability:
stick a Popsicle stick in the liquid and then into a flame, if it catches on fire it is.
Solubility of sugar:
Put a pinch of sugar into the liquid and shake it up.

# data[].attributes.body
Boiling point:
You will record time every 30 seconds, and star where the temperature starts to platue or not increase.
Once its boiling try to push it a little farther and once it is no longer increasing record data for another six minutes and stop.
Hint:
Use Less water, 4-8 ml at least if you have a distillation tube.

# data[].attributes.body
Mass:
Mass of the GC
Mass of GC and Liquid
Mass of liquid and GC- Mass of GC= Mass of Liquid
Volume
Just how many ML there are in the GC
Density
D=M/V

# data[].attributes.body
Bubbles, Just bubbles, if no bubbles then there is no reaction.
Safety:
Clean your dish when your done, and don't stand over the fumes.

# data[].attributes.body
Use a magnet to test if it has a magnetized charge or not.

# data[].attributes.body
Mass:
Just put it on the balance and measure to the tenth place.
Volume:
Irregular and Regular, at the bottom.
Density:
D= M/V
Make sure that the answer is then labeled g/ml or g/cm3

# data[].attributes.body
You will have to use and evaporation dish, and bring it to a boil and don't take the heat away until the bubbles completely disappear.
The dish will be hot. make sure not to run the clay pots under the water, it will crack and brake the dish.

# data[].attributes.headline
(2b) Find Density and other properties of the plastic and metals

# data[].attributes.subject
(2b) Find Density and other properties of the plastic and metals

# data[].attributes.body
make sure that you describe what each one looks like just in case your partner has to take over.

# data[].attributes.body
Put it into a filter paper in a funnel, or pull out the big pieces with the tweezers.

# data[].attributes.body
You have to separate the two liquids by boiling the substance in the big test tube, and it will go threw the distillation tube, and into the condensing tube.

# data[].attributes.body
Solubility:
-Measure out 10 ml of the solvent with the solute in it.
-weight the boiling dish
_bring boiling dish to a boil and take it off
-measure the boiling dish with the powder, and then subtract measurements
-Put the weight of the grams in powder over 10 ml

Grams/100 ml of water

# data[].attributes.body
-we will have 8-12 substances (meaning we have to do 3-4 a day)
-We will have one Plastic
-one dissolved powder
-we will have  to separate and identify
-we will have
Our sludge is supposed to mimic what peoples jobs are in real life, and us getting point off is almost like letting waste infect a village because you got it wrong.

# data[].attributes.body
Make sure to do the water test first and find out if it sinks or floats before getting anything else out. (will only have one plastic in sludge.)