# data[].attributes.body
•This wiring is made up of ordinary PVC or VIR insulated wires that are twisted and condensed.

•They are attached to walls and ceilings using slotted porcelain, wooden or plastic plugs.

•This is a temporary wiring system, so it is not suitable for domestic installations.

•Also, the cleat wiring system is rarely used today

# data[].attributes.body
•Commercial jobs are comparatively more complicated.

•They are usually larger projects. Commercial electrical services encompass many structures, such as :

•- Malls

•- Industrial factories

•- Office buildings

•- Corporations

# data[].attributes.headline
Correct Steps to follow to wire the house-MUÑOZ

# data[].attributes.subject
Correct Steps to follow to wire the house-MUÑOZ

# data[].attributes.body
7.- Install circuits:

Install individual circuits for each set of cables.

The circuits must match the amperage of the cord and the purpose of the outlet.

# data[].attributes.headline
Correct Steps to follow to wire the house-VELASQUEZ

# data[].attributes.subject
Correct Steps to follow to wire the house-VELASQUEZ

# data[].attributes.body
5.- Set a circuit breaker:

Place your breaker box where it can be easily accessed in the future.

It is particularly convenient if it is located in a basement or in a utility room.

# data[].attributes.headline
Correct Steps to follow to wire the house-SILVA

# data[].attributes.subject
Correct Steps to follow to wire the house-SILVA

# data[].attributes.body
4.- taladrar los agujeros para los cables:

Antes de perforar los agujeros, asegúrate de saber que hay al otro lado la pared o del suelo para evitar perforar cables eléctricos, conductos o tuberías de agua

proceda a perforar agujeros con una broca de 1 pulgada en el centro de los montantes por donde pasaran los cables

cuantos mas enchufes tengas, mas seguro será tu hogar.

# data[].attributes.headline
Correct Steps to follow to wire the house-ALOR

# data[].attributes.subject
Correct Steps to follow to wire the house-ALOR

# data[].attributes.body
1.- Design a Wiring Diagram:

Design a wiring diagram showing the location of the breaker box and the cable routing to each outlet.
Traduccion

Pasos correctos a seguir para cablear la casa

1.- Diseñar un Diagrama de Cableado:Pasos correctos a seguir para cablear la casa

1.- Diseñar un Diagrama de Cableado:Diseñe un diagrama de cableado que muestre la ubicación de la caja de interruptores y el enrutamiento del cable a cada tomacorriente.

# data[].attributes.headline
E-5.2 Duct wiring/Hidden Duct Cabling: LÓPEZ-ESPINOZA

# data[].attributes.subject
E-5.2 Duct wiring/Hidden Duct Cabling: LÓPEZ-ESPINOZA

# data[].attributes.body
• When conduit is hidden within grooves in the wall or chiseled brick wall, it is called concealed conduit wiring.

•The electrical cables are placed inside the conduits. This is a popular method as it is stronger and more aesthetically appealing.

•However, there are some of the advantages and disadvantages of the hidden wiring system:
•Advantages :

•- It is a safe wiring system.

•- Safe from chemical effects, humidity, and other external factors.

•- No risk of electric shock.

•- It is aesthetically attractive. (LÓPEZ)

•- There is no risk of wear, fire, or damage to the cable insulation.

•- Fairly reliable.

•- Renovations are easy to do as old cables can be replaced with ease.
•Disadvantages :

•- It is expensive compared to surface wiring.

•- Difficult to change the location of switches or appliances.

•- Installation is complex.

•- Hard to find faults in the wiring.

•- Adding additional conduits in the future is a tedious task.

•When the wiring is not done correctly or is not well-maintained, it can lead to dangerous situations such as electrical fires.

•Therefore, it is important to be very careful when installing electrical cables. ESPINOZA)

# data[].attributes.headline
E-5.1 Duct Wiring/Surface Duct Cabling:GUTIERREZ

# data[].attributes.subject
E-5.1 Duct Wiring/Surface Duct Cabling:GUTIERREZ

# data[].attributes.body
•When EMT or PVC conduit is installed in the walls or ceiling, it is known as surface conduit wiring.

•The ducts are attached to the walls with a 2-hole strap and base clip at regular distances.

•The electrical cables are placed inside the conduits.
TRADUCCION:
Cuando se instalan conductos EMT o PVC en las paredes o techo, se conoce como cableado de conductos de superficie.
Los conductos se fijan en las paredes con una unas abrazaderas de 2 orificios y 1 clip de base a distancias regulares.
Los cables electricos se colocan dentro de los conductos.

# data[].attributes.headline
Correct Steps to follow to wire the house-OROZ

# data[].attributes.subject
Correct Steps to follow to wire the house-OROZ

# data[].attributes.body
6.- Pull the cords to the electrical outlets, types of electrical installations:

Lay the coil of wire next to the breaker box and pull the wire according to the diagram to the nearest outlet or switch for each circuit.

You can also run the cables directly through the box.

Any wire that sticks out of the box can be covered with drywall or can be cut from the electrical box.

Use wire strippers to remove the outer plastic sheathing from the ends of the wires and attach them, according to the instructions on the box, to each outlet, appliance, or switch.

# data[].attributes.headline
Correct Steps to follow to wire the house-SAAVEDRA

# data[].attributes.subject
Correct Steps to follow to wire the house-SAAVEDRA

# data[].attributes.body
2.- Install the ducts:

Start by running the longest cables first to avoid wasting conduit on the walls, even if you don’t plan on using them right away.

Start each cable upstairs and run down to the basement.

This way, you don’t have to use a ladder to climb the cable between floors.

You should also leave at least a foot of extra cable at each end in case you need to move things around later.

# data[].attributes.body
Slat wiring consists of a single electrical cable or a group of cables laid over a wooden slat.
•The cables are fixed to the batten with a brass clamp and are spaced at a distance of 10 cm in the horizontal sections and 15 cm in the vertical sections.
•Slat wiring consists of a single electrical cable or a group of cables laid on a wooden slat.

•The cables are attached to the batten with a brass clamp and are spaced at an interval of 10 cm on the horizontal runs and 15 cm on the vertical ones.

# data[].attributes.headline
Correct Steps to follow to wire the house-SANDOVAL

# data[].attributes.subject
Correct Steps to follow to wire the house-SANDOVAL

# data[].attributes.body
3.- Know the number of plugs:

Determine how many outlets and switches will work in one circuit.

Typically, six outlets per 110-volt circuit are recommended in a living room, while in the kitchen, where appliances draw the most watts, there are typically only two per circuit.

# data[].attributes.headline
E- 2-Domestic Electrical Wiring/Housing and Plug Wiring/ COX

# data[].attributes.subject
E- 2-Domestic Electrical Wiring/Housing and Plug Wiring/ COX

# data[].attributes.body
•Housing and plug wiring was very popular in the past but today it is considered obsolete due to the popularity of the use of connectors and covers in wiring systems/

•The wires used in this style of electrical wiring are PVC, VIR, or any other approved insulated wire/

•The cables are led through the wooden boxes which are made of a strip of wood with parallel grooves cut lengthwise to accommodate the cables./

# data[].attributes.body
•Every house or apartment will require electrical installation.

•You cannot even imagine the situation that certain residential place does not have these installations.

•When a brand new house is built, an electrician will have to connect electricity wires of the house with the power lines, and that is how the house will have electricity.

# data[].attributes.body
•Lead jacketed wiring uses VIR insulated conductors covered with a lead aluminum alloy outer jacket containing approximately 95% lead.

•The metal jacket protects the cables from mechanical damage, moisture and atmospheric corrosion.

# data[].attributes.body
•In order for car to run certain wires must be connected properly, and those wires can be found under the car dashboard.

•Every car has several electrical features and they will require proper installation.

•For example – for satellite navigation system, alarms or sound system in your car, you will have to hire a professional to set those entire things in order to work.

# data[].attributes.body
•Certain types of boats will need electrical installations in order to run.

•You know that boats can have anything inside like a small apartment.

•They can have bathrooms, kitchen, living room, and bedroom.

•If that is the case, you can see that all of that will for sure require electrician and their services.