# data[].attributes.headline
Almost done need to add something to the back.

# data[].attributes.subject
Almost done need to add something to the back.

# data[].attributes.headline
Added some sand around lower jaw area and under the eyes.

# data[].attributes.subject
Added some sand around lower jaw area and under the eyes.

# data[].attributes.headline
Paint still looks messy but after it’s fixed it will look good. Also added ear piercings.

# data[].attributes.subject
Paint still looks messy but after it’s fixed it will look good. Also added ear piercings.

# data[].attributes.headline
Painting was the most difficult part and i had to clean it up a lot.

# data[].attributes.subject
Painting was the most difficult part and i had to clean it up a lot.

# data[].attributes.headline
Added white to the eyes and tech for more color and pop.

# data[].attributes.subject
Added white to the eyes and tech for more color and pop.

# data[].attributes.headline
Added some purple detailing around the mask to give it that Black Panther vibe.

# data[].attributes.subject
Added some purple detailing around the mask to give it that Black Panther vibe.

# data[].attributes.headline
Details are hard to see in this lighting

# data[].attributes.subject
Details are hard to see in this lighting

# data[].attributes.headline
Started painting after putting on forehead details.

# data[].attributes.subject
Started painting after putting on forehead details.

# data[].attributes.headline
Covering details to make them flat and cleaner looking.

# data[].attributes.subject
Covering details to make them flat and cleaner looking.

# data[].attributes.headline
Decided to do a. spin on the mask while adding details.

# data[].attributes.subject
Decided to do a. spin on the mask while adding details.

# data[].attributes.body
This took a long time to get relatively decent looking but I think it’s not too bad. I would like to fix it up more.

# data[].attributes.headline
Different angel but this is the general idea

# data[].attributes.subject
Different angel but this is the general idea

# data[].attributes.body
Bowls shape was really weird so I decided to shape it into more of a triangle and go for a shark look. First designs of singular teeth.

# data[].attributes.body
Minors aren’t as good as i wanted but they were rushed

# data[].attributes.body
finishing touches and minor details

# data[].attributes.body
The amount of fingers that broke off so far is wild.

# data[].attributes.body
Hollowing out the inside.

# data[].attributes.body
Detailing veins

# data[].attributes.body
More angle cuts

# data[].attributes.body
Cutting to make finger bends.

# data[].attributes.body
Need to add more of a wrist and fix proportions more.

# data[].attributes.body
Peep Morgan and Gabe

# data[].attributes.body
Moving the thumb forward.

# data[].attributes.body
Trying to wet it more to do more detailing.

# data[].attributes.body
It’s kind of drying up…

# data[].attributes.body
A few things were messed up So this is a pic of after i restarted some of it.

# data[].attributes.body
Trying to add smaller details.

# data[].attributes.body
Different angle

# data[].attributes.body
They to get a little more detail.

# data[].attributes.body
Getting a bit closer.

# data[].attributes.body
Starting to make it more rounded

# data[].attributes.body
Lmao this looks bad but it’s the first step.

# data[].attributes.body
Three story building with staircase on each floor and one main thing inside that represents something.

# data[].attributes.body
Basically all done.

# data[].attributes.body
Ended up doing a heart for the first floor. Might be hard to see.

# data[].attributes.body
A bit messier than I wanted but…

# data[].attributes.body
Three things that are important in my life: God, Direct family (5 people) and becoming better in any way possible.

# data[].attributes.body
Finally have most of the pieces cut out and each story individually slipped.

# data[].attributes.body
Putting the staircase and walls together.

# data[].attributes.body
making general idea of how the building is going to be made.

# data[].attributes.body
Making more parts for the building

# data[].attributes.body
More parts to the building and a small table.

# data[].attributes.body
Four sided building with staircase

# data[].attributes.body
Just a couple of slab windows

# data[].attributes.body
When starting this peice, I really didn’t know what to expect from myself. I went through a lot of ideas on how I was going to portray some sort of story. The process was a lot slower than I thought because there were a few setbacks. For example a week and half in I had to change the way I did the stairs(I had already almost finished my first stair design at this point). On the actual wall relief itself I had problems putting it together and had to go back to it weeks later. On the design, I wanted to do something fairly simple. I was originally wanting to do something similar to the finished product but instead of having a demon/devil creature, I wanted to have a flat platform connected to the bottom of the stairs(representing the ground). On/attachment to the platform I wanted to have figures coming out of it that looked like they were trying to grab onto the person going  up the stairs. This was to represent me or anyone who is trying to improve themselves and their life and being pulled down by other things in their life. I ended up going with a demon because It serves the same purpose at the people coming out of the ground and also because I ran out of time to crate multiple figures. For the stair case I tried to make it as uniform as possible with a simplistic design that just represents “going up”, or improving. For the two figures, I gave them very small facial and body designs that didn’t take away from the general focus of the peice. If I had to change anything on the peice it would be how I oriented the stairs on the all relief and also the general details on the peice itself. At the end of the day I represented what I wanted to and I feel pretty successful with the work I did on my wall-relief.

# data[].attributes.body
I only used a few picture resources for my wall tried and although my finished product doesn’t look very close to these or a s realistic it does the job.

# data[].attributes.body
Need to clean it up a bit but stuff keeps falling off.

# data[].attributes.body
Figuring out how I want to make the clay people.

# data[].attributes.body
Used the sponge to round the corners a bit.

# data[].attributes.body
Very blocky

# data[].attributes.body
Trying to make it look clean.

# data[].attributes.body
Really rough creation of the stick figure person i’m making.