# data[].attributes.body
When I made my slab mug it was really fun because I learned how to use zentangles, parallel lines. On my mug I had to use 2 shape molds a rectangle and a circle and had to use clay slip which is like clay glue and the slip helped it stay together and thought making a mug was really fun😄🐢😎

# data[].attributes.body
When I made my clay mug I used a sponge to smooth out the edges. I used the needle tool to cut out my rectangle and circle and to sketch out my design.  I also used a ripped tool to fix imperfections.  One way I made texture is using a needle tool to sketch my design.  Another way is using the sgraffito tool to carve out my design.  One problem with joining clay together is if your clay doesn't stand straight.  A solution is to stick it down very hard to the slip so it sticks together.

Thanks Mrs. Choi!!!!!

# data[].attributes.body
Three tools I used were the sponge, the needle tool and the toothbrush. I used the sponge to smooth the surface. I used the needle to sketch out designs on my mug. I used the toothbrush to apply the slip. I carved with the needle tool and used the sgraffito tool too! problem was to make the clay stick together, the solution was to use slip and smooth them together.

# data[].attributes.body
In process of making zentangle mugs we needed tools like the rolling pen to roll out the clay for you can construct the mug. You used also a sponge to slick the clay and its nice and clean. Another tool you can use is the needle to draw on the designs for its a entangle mug. The needle created texture, but its much liter then the craving tool which carves out the designs to make a texture and design. While joining clay your handle could fall of but if the mug itself is hard so it will join with a little slip.

# data[].attributes.body
To make my mug, I used a sgraffito tool, a sponge, and a needle tool. I used the sponge to smooth out surfaces on my mug, I used the needle tool to shape out parts of my mug and sketch my design on my mug. Then, I went over my design with the sgraffito tool. I used texture by indenting the mug with the sgraffito tool. I also used texture by applying glaze which makes my mug smooth (and waterproof). 1 problem I faced when joining clay together was lining up the rectangle and circle. A solution was to use slip after I put the mug together to make it look more put together.

# data[].attributes.body
When I was making my mug I had to roll out the clay, then I had to cut it into a rectangle, then use the excess clay to make c circle. After that I had tout them together using slip. then you smooth it all out with a ripped tool and a sponge. then you would have to make the handle and slip it on. then the next day toy had to do your design and then you had to carve it out. then you glaze it. then do the inside and then you fire it! then your done!

# data[].attributes.body
When making my mug I used a roller to flatten out the clay to make the mug. I also used a toothbrush to apply the slip to connect the handle to the mug. The last one was a sponge to get the black slip out of the inside of the mug. I created textures by making patterns that are carved on my mug. smoothing the mug made it easier to hold without scraping myself when it was finished. A problem I had was when I was drawing my "Z" it was a little small, so I subtracted some of the designs.

# data[].attributes.body
I liked the mugs, the carving was really fun. I also liked getting my hands messy, even if I ruined my nails!

# data[].attributes.body
The slab mugs were super fun. I loved doing it all. I used slip, my hands, and a sponge to help me get all of the mug done. I really had a fun time with this zantangle design!

# data[].attributes.body
While i was making my mug i learned the different stages of clay. i also used a ripple tool, and a rib tool. it was a really fun project. also we did entangle on the mug to have a them to it kinda. if i could do something different i would have reformed my mug.

# data[].attributes.body
to make my mug i used grey clay,a rip tool to sooth the clay parts,a knife to cut the edges and a sgrafitle tool to carve out my zentanle design.a zentangle design is fancy doodling. I LOVED this project and it is very useful.what i did not like was that my mug was little uneven and what i liked was my colors and my designs!

thank you miss.Choi :)
.

# data[].attributes.body
When making my slab mug I used a rip tool to smooth the parts where I connected my clay, a needle tool to scetch my design into my clay, and I used a sgraffedle tool to carve out my designs. You can use a sponge or a sgraffedle tool to create texture. You may have trouble rolling out the clay, but you must keep trying!

# data[].attributes.body
The mugs was my favorite project!i like learning the stages, zentagle and carving. When I learned the stages I knew this was going to be my favorite project. When I learned that entangle was only fancy doodling. Lastly I liked to carve. i had trouble at first but then it got easier. I like art so much and hope tp do it again.

# data[].attributes.body
Club mugs were my favorite project! I love using clay. 3 tools that I used slip to glue my mug together and I used a toothbrush to apply it to my mug. I also used a sponge to smooth it so no one can tell where I joined the sides. After I finished that I used a needle tool to outline my zantangle design. The needle tool created some texture but the scrafeedle tool to make the sector really stand out, it also made it black and white. I messed up my mugs body at the beginning, so I just rolled it out again with the roller and went at it again. Over all I think I really under stood clay and I also liked it a lot! My favorite project!

# data[].attributes.body
I think slab mugs were my favorite. I used the needle tool to carve my designs but it was kind of hard because they can't make straight lines. I also used black slip which got into my mug but I fixed it using another tool, a sponge. I used a scraffital tool to make texture and also to go over the texture I made with the needle tool. One problem with the clay was that when it started out it was really wet so it was harder to stick together, but I used slip and it stuck together well enough that when I cam back the next day it was dry enough to manipulate. Overall, I think I did a wonderful job and I hope I can do art next year,

# data[].attributes.body
What I learned about clay was how to construct, glaze, draw, and finalize the clay mug. I LOVED the project!! What I could of done better and differently was when I used the needle tool I kept messing up when I made the design. To fix it I used black slip. What I did good in was when I made a sketch of my design. And when I started getting better at using the needle tool. I really like making clay anything, especially clay mugs.

# data[].attributes.body
I thought the zentangle mug was one of my favorite projects. It was kind of hard to carve designs with the needle tool because sometimes it was hard to make straight lines and it was also hard to carve out my C because it was hard to make it all level.

# data[].attributes.body
I learned a lot about clay with the different stages and how to make it with will help in the future. I like the project because it was fun to do with my friends. It is cool that it works and i learned a lot like how to make zentangle. I have learned a lot and i am thank full for that.