# data[].attributes.body
Maryam almansoori

# data[].attributes.body
Athba mohammed

# data[].attributes.body
Maryam Ali

# data[].attributes.body
Fatima jassim

# data[].attributes.body
Hoor Jasem

# data[].attributes.body
Amira Abdullah

# data[].attributes.body
Maitha Matar

# data[].attributes.body
Moza Abdulla

# data[].attributes.body
Moza Mohammed

# data[].attributes.body
Marya

# data[].attributes.body
Alanoud Alketbi

# data[].attributes.body
It’s a belt that is used to connect the machines together so the machine will work- Salamah

# data[].attributes.headline
Moza Abdulla.                                                               Bolts are screws with threaded cylinders and various types of heads. ... They are nearly always paired with a nut which has a matching threaded hole. The friction of the thread and compression work together to form the fastener.

# data[].attributes.subject
Moza Abdulla.                                                               Bolts are screws with threaded cylinders and various types of heads. ... They are nearly always paired with a nut which has a matching threaded hole. The friction of the thread and compression work together to form the fastener.

# data[].attributes.body
Jawaher

# data[].attributes.body
Drive belt

# data[].attributes.headline
Bearings are "parts that assist objects' rotation". 

# data[].attributes.subject
Bearings are "parts that assist objects' rotation". 

# data[].attributes.body
Alanoud Alketbi

# data[].attributes.body
bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts.

# data[].attributes.body
The bolt consists of a head and a cylindrical body with screw threads along a portion of its length. The nut is the female member of the pair, having internal threads to match those of the bolt. Washers are often used to prevent loosening and crushing.

# data[].attributes.body
A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts. ... The simplest form of bearing, the plain bearing, consists of a shaft rotating in a hole.

# data[].attributes.body
The bolt consists of a head and a cylindrical body with screw threads along a portion of its length. The nut is the female member of the pair, having internal threads to match those of the bolt. Washers are often used to prevent loosening and crushing.

# data[].attributes.body
Hoor jasem

# data[].attributes.body
Jawaher

# data[].attributes.body
A screwdriver is a tool that is used for turning screws. It consists
of a metal rod with a flat or cross-shaped end that fits into the top
of the screw.

# data[].attributes.body
Pliers are made in various shapes and sizes and for many uses. Some are used for gripping something round like a pipe or rod, some are used for twisting wires, and others are designed to be used for a combination of tasks including cutting

# data[].attributes.body
Types of bearings

# data[].attributes.body
Jawaher
When it comes to drive belts, multiple types are necessary to keep your car running. If you know about the different kinds of drive belts, you can properly maintain them and replace them as needed.

# data[].attributes.attachment_caption
Two fasteners fastened, fastened together, in an opposite way in removing nails and the like, is a machine used by a carpenter.

# data[].attributes.body
Jawaher
Know

There are three types of drive belts:

1. Serpentine Belt

A serpentine belt is located under the hood of a car, and it “snakes” its way between various pulleys and accessories. This type of drive belt is usually found in cars produced after 1990. It also tends to last longer than other types of drive belts, is simple to install and remove, and transmits power between a car’s air conditioner compressor, water pump, alternator, and steering pump.

2. V-Belt

A V-belt runs off a crank and pulley and typically travels between one or two engine accessories. Older cars often have several V-belts used for power steering, air conditioning, and other operating essentials. V-belts can be more difficult to change than serpentine belts. Additionally, if V-belts become loose, they can cause your alternator to malfunction and lead your engine to overheat.

3. Timing Belt

A timing belt links your car engine’s crankshaft to its camshaft; the crankshaft helps the engine’s pistons rotate, while the camshaft helps open and close engine valves. It can be tough to see the timing belt due to the fact that it is likely hidden underneath a timing cover. However, the timing belt should not be ignored; otherwise, if the timing belt wears down and malfunctions, it may result in a costly, time-intensive engine rebuild.

# data[].attributes.body
Moza saif

# data[].attributes.body
Jawaher
Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe.[1] They are also useful for bending and compressing a wide range of materials. Generally, pliers consist of a pair of metal first-class levers joined at a fulcrum positioned closer to one end of the levers, creating short jaws on one side of the fulcrum, and longer handles on the other side.[1] This arrangement creates a mechanical advantage, allowing the force of the hand's grip to be amplified and focused on an object with precision. The jaws can also be used to manipulate objects too small or unwieldy to be manipulated with the fingers.

# data[].attributes.body
A screwdriver is a tool, manual or powered, used for driving screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle.

Wrenches are made in various shapes and sizes and are used for gripping, fastening, turning, tightening and loosening things like pipes, pipe fittings, nuts and bolts.

# data[].attributes.body
Bearings are "parts that assist objects' rotation". They support the shaft that rotates inside the machinery.

# data[].attributes.body
A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle.

# data[].attributes.body
pliers types

# data[].attributes.body
The two main types of drive belts are v-belts and serpentine belts. These belts are made out of similar materials with similar construction techniques, but they have a few key differences.

V-belts have a wedge-like appearance when viewed in cross section.