# data[].attributes.body
neaten up pockets and cross stitch down. ready to add the lining onto the waistband.

# data[].attributes.body
add further stitches to secure.

# data[].attributes.body
add the bar and secure with a stitch.

# data[].attributes.body
stitch this into place.

# data[].attributes.body
secure the bar into place by doing a figure of 8 with your thread.

# data[].attributes.body
add the bar into the waistband. making sure the placement is correct.

# data[].attributes.body
fel stitch both sides down.

# data[].attributes.body
fold back waistband,and fel stitch down to secure.

# data[].attributes.body
baste the curtain making sure to add pleats. to allow for movement when walking.

# data[].attributes.body
do this on both sides

# data[].attributes.body
Attach the pocket bag to your facing. use the feling stitch

# data[].attributes.headline
add your curtain and secure the pocket down using the felling stitch 

# data[].attributes.subject
add your curtain and secure the pocket down using the felling stitch 

# data[].attributes.headline
when sewing move pocket out of the way so you dont sew them closed catch the top and bottom of the pocket  

# data[].attributes.subject
when sewing move pocket out of the way so you dont sew them closed catch the top and bottom of the pocket  

# data[].attributes.headline
 
now sew the side seams together. 
match your inlay marks up 

# data[].attributes.subject
 
now sew the side seams together. 
match your inlay marks up 

# data[].attributes.headline
now hand sew the zip down , back stitching and felling 

# data[].attributes.subject
now hand sew the zip down , back stitching and felling 

# data[].attributes.headline
roll facing over and hie seam , around 3mm roll , so the seam is not visible from the front 

# data[].attributes.subject
roll facing over and hie seam , around 3mm roll , so the seam is not visible from the front 

# data[].attributes.headline
match notches on the other facing on the other leg. and sew 1cm seam down 

# data[].attributes.subject
match notches on the other facing on the other leg. and sew 1cm seam down 

# data[].attributes.headline
now lay your facing on top matching up the notch where the end of the zip should be and sew down 1cm 

# data[].attributes.subject
now lay your facing on top matching up the notch where the end of the zip should be and sew down 1cm 

# data[].attributes.headline
baste zip facing t the right side into place 

# data[].attributes.subject
baste zip facing t the right side into place 

# data[].attributes.headline
adding the zip 

first press the zip to pre shrink 

# data[].attributes.subject
adding the zip 

first press the zip to pre shrink 

# data[].attributes.headline
now pull though and sew 1cm around to finish 

# data[].attributes.subject
now pull though and sew 1cm around to finish 

# data[].attributes.headline
sew around the bag 0.5  then trim around 

# data[].attributes.subject
sew around the bag 0.5  then trim around 

# data[].attributes.headline
lay the second part of the pocket bag on 

# data[].attributes.subject
lay the second part of the pocket bag on 

# data[].attributes.headline
now baste another facing on the bag ready to be attached. once sewn it should be 4cm above the mark line. then stitch into place. 

# data[].attributes.subject
now baste another facing on the bag ready to be attached. once sewn it should be 4cm above the mark line. then stitch into place. 

# data[].attributes.headline
now sew down your internal facing. 
roll edge over so it is neat. 

# data[].attributes.subject
now sew down your internal facing. 
roll edge over so it is neat. 

# data[].attributes.headline
now trim the facing down the bottom and also on the side so it doesn't get caught in the pocket bag creating bulk. 

# data[].attributes.subject
now trim the facing down the bottom and also on the side so it doesn't get caught in the pocket bag creating bulk. 

# data[].attributes.headline
secure the pocket opening by doing a zip zag stitch both side

# data[].attributes.subject
secure the pocket opening by doing a zip zag stitch both side

# data[].attributes.headline
pull though the bottom facing, and press seams 

# data[].attributes.subject
pull though the bottom facing, and press seams 

# data[].attributes.headline
on the reverse side you should have a 1cm opening 

# data[].attributes.subject
on the reverse side you should have a 1cm opening 

# data[].attributes.headline
now cut down the centre or the pocket opening, and make the prongs at each end. 

# data[].attributes.subject
now cut down the centre or the pocket opening, and make the prongs at each end. 

# data[].attributes.headline
sew 0.5 along the facing you have basted into place. Then baste you linen strip onto the other facing lay this one onto the 0.5 line you have sewn. and sew 0.5 from this line. 

# data[].attributes.subject
sew 0.5 along the facing you have basted into place. Then baste you linen strip onto the other facing lay this one onto the 0.5 line you have sewn. and sew 0.5 from this line. 

# data[].attributes.headline
cut a strip of holland linen 20 cm x  1.5 cm for the welt. then press the linen so you pre shrink . 

# data[].attributes.subject
cut a strip of holland linen 20 cm x  1.5 cm for the welt. then press the linen so you pre shrink . 

# data[].attributes.headline
place facing onto opening line, right side to right side

# data[].attributes.subject
place facing onto opening line, right side to right side

# data[].attributes.headline
baste on pocket bag, sew on the line of the opening. Make sure bag does into the waste band inlay.

# data[].attributes.subject
baste on pocket bag, sew on the line of the opening. Make sure bag does into the waste band inlay.

# data[].attributes.headline
Making of the hip pocket (optional )

from your markings cut and press on a small square of interfacing where the end of the opening will be. This will strengthen the openings. 

# data[].attributes.subject
Making of the hip pocket (optional )

from your markings cut and press on a small square of interfacing where the end of the opening will be. This will strengthen the openings. 

# data[].attributes.headline
20. securing pockets
sew down on your tape in a rectangle shape 

# data[].attributes.subject
20. securing pockets
sew down on your tape in a rectangle shape 

# data[].attributes.headline
19,

bag out and sew 1cm to finish french seam

# data[].attributes.subject
19,

bag out and sew 1cm to finish french seam

# data[].attributes.headline
19 pocket bag

mark up notches and french seam the bag 

# data[].attributes.subject
19 pocket bag

mark up notches and french seam the bag 

# data[].attributes.headline
19. pocket bag

tracing around pocket bag template. add inlay and cut

# data[].attributes.subject
19. pocket bag

tracing around pocket bag template. add inlay and cut

# data[].attributes.headline
18. 

mark on the facing where you will lay the trouser onto. 

# data[].attributes.subject
18. 

mark on the facing where you will lay the trouser onto. 

# data[].attributes.headline
18.  pocket facing

Turn and press seam open, then fold back on the pocket line and baste into place. Do not press.

# data[].attributes.subject
18.  pocket facing

Turn and press seam open, then fold back on the pocket line and baste into place. Do not press.

# data[].attributes.headline
17. pocket facing 

sew down the line 0-5mm, right side to right side. Then trim away on the diagonal line, then cut 1cm in. 

# data[].attributes.subject
17. pocket facing 

sew down the line 0-5mm, right side to right side. Then trim away on the diagonal line, then cut 1cm in. 

# data[].attributes.headline
16. pocket facing

right side to right side, make sure there is 4cm down from your notch. draw a line from the corner to corner, and come in 1cm  to nothing and mark. 

# data[].attributes.subject
16. pocket facing

right side to right side, make sure there is 4cm down from your notch. draw a line from the corner to corner, and come in 1cm  to nothing and mark. 

# data[].attributes.headline
15. pocket facing 

Cut a strip at 22cm x5,  baste onto pocket position

# data[].attributes.subject
15. pocket facing 

Cut a strip at 22cm x5,  baste onto pocket position

# data[].attributes.headline
14. Darts

sew up back darts, and press flat.

# data[].attributes.subject
14. Darts

sew up back darts, and press flat.

# data[].attributes.headline
12. Pleats

press pleats and baste into place.

# data[].attributes.subject
12. Pleats

press pleats and baste into place.

# data[].attributes.headline
11. overlock

overlock sides of pocket facing on the non neaten side. 

# data[].attributes.subject
11. overlock

overlock sides of pocket facing on the non neaten side. 

# data[].attributes.headline
10. overlock

overlock sides,bottoms but leave the top.

# data[].attributes.subject
10. overlock

overlock sides,bottoms but leave the top.

# data[].attributes.headline
9.facing prep 

baste flay guard onto linen

# data[].attributes.subject
9.facing prep 

baste flay guard onto linen

# data[].attributes.headline
8. facing prep 

Baste facings onto linen fold sides and bottom 1cm, baste into place. sew down edge to secure. 

# data[].attributes.subject
8. facing prep 

Baste facings onto linen fold sides and bottom 1cm, baste into place. sew down edge to secure. 

# data[].attributes.headline
7. facing prep

cut a piece of linen 3cm x 25cm baste this into place on the fly  

# data[].attributes.subject
7. facing prep

cut a piece of linen 3cm x 25cm baste this into place on the fly  

# data[].attributes.headline
6. facing prep 

Cut your holland linen for your facings, make sure stream them before attaching to pre shrink them 

# data[].attributes.subject
6. facing prep 

Cut your holland linen for your facings, make sure stream them before attaching to pre shrink them 

# data[].attributes.headline
5. adding crotch guard 

overlook this area 
 

# data[].attributes.subject
5. adding crotch guard 

overlook this area 
 

# data[].attributes.headline
4. adding crotch guard

Baste this shaped triangle into place on the crotch area, and trim off excess.

# data[].attributes.subject
4. adding crotch guard

Baste this shaped triangle into place on the crotch area, and trim off excess.

# data[].attributes.headline
3. adding crotch guard

Press square of holland linen into a triangle and curve

# data[].attributes.subject
3. adding crotch guard

Press square of holland linen into a triangle and curve

# data[].attributes.headline
2.mark stitch

Mark stitch your chalk lines, balance points and inlay marks and cut open

# data[].attributes.subject
2.mark stitch

Mark stitch your chalk lines, balance points and inlay marks and cut open

# data[].attributes.body
Lay pattern pieces onto your chosen cloth making sure that you lay all pieces all correct to the grain line and making sure to lay them so you are not wasting any fabric.