# data[].attributes.body
Printmaking is the process of creating artworks by printing on paper. Their are four types of categories of printmaking. Those are relief, intaglio, lithography, and screen-printing.

# data[].attributes.body
Printmaking is when the image can be printed with ink or paint onto paper or cloth. I remember as a kid I use to take leaves from outside and put them under paper and color over it with crayon, chalk, or colored pencil. I didn’t know it at the time but that was a form of printmaking. My example however, looks as if it was made using the relief printmaking technique.

# data[].attributes.body
Audra Ferry: Intaglio is the family of printmaking techniques where the image is incised into a surface and then the sunken area holds the ink

# data[].attributes.body
Audra Ferry: an image is incised into a surface and then the incised area holds the ink which places the color on paper, etc.

# data[].attributes.body
Marsha Babington
Relief Prints are prints made by raised print surfaces with ink in contact with paper. The artist creates a matrix by cutting away all parts of the printing surface leaving only the area with the design. The design is considered to be "in relief" as it is at the original surface level. Various carving tools are used to achieve the design. Ink is then applied to the design area. The design area is brought into contact with paper through pressure. Voila! Relief prints.

# data[].attributes.body
Matt Partlow
The definition of screen printing is to force ink through a prepared screen of fine material to create a picture or pattern.
https://youtu.be/oOQcfp36LDo

# data[].attributes.body
Matt Partlow
3D printing is not a traditional type of print because it is not an impression but more of a limited edition by the artist. The definition of 3D printing is printing in three dimensions from a design  created using modeling software.
https://images.app.goo.gl/QaCYAfmn2vFNALto7

# data[].attributes.body
Etching is an intaglio printmaking process in which a metal plate is first coated with acid-resistant wax or varnish, then scratched to expose the metal to the bit of nitric acid where lines are desired; also the resulting print.

# data[].attributes.body
Drypoint etching is technique used in preparing metal plates for printmaking. The lines are scratched directly onto the plate. Thicker lines are made by applying pressure to a burin or etching needle.

# data[].attributes.body
Woodcuts are a relief printing surface consisting of a wooden block with a usually pictorial design cut with the grain. An artist carves an image into a wooden plank using sharp blades and small chisels called gouges. Using repeated lines, they remove material from areas that will not be printed. Once finished, the wood plank is inked with a roller (areas that have not been cut away) The ink is then pressed on to fabric or paper which results in an impression of the image.

# data[].attributes.body
Linocut is a printmaking technique, a variant of woodcut  in which a sheet of linoleum (sometimes mounted on a wooden block) is used for a relief surface. A design is cut into the linoleum surface with a sharp knife, V-shaped chisel, with the raised (uncarved) areas representing a reversal (mirror image) of the parts to show printed. The linoleum sheet is inked with a roller, and then impressed onto paper or fabric. The actual printing can be done by hand or with a printing press.

# data[].attributes.attachment_link.authors[].name
Drawing & Painting - The Virtual Instructor